Aqua Ultraviolet – SL 100 Watt Replacement Quartz Sleeve with Bushing & Rubber Seal

Aqua Ultraviolet – SL 100 Watt Replacement Quartz Sleeve with Bushing & Rubber Seal

Overview

Factory replacement quartz sleeve for the Aqua Ultraviolet SL 100 UV sterilizer. The sleeve isolates the lamp from water while maximizing UV-C transmission. Includes the correct end bushing and a new rubber seal for a clean, drip-tight rebuild.

Key Features

• OEM high-clarity quartz sleeve for SL 100

• End bushing included for proper fit and alignment

• Rubber seal (gasket) restores a reliable, leak-resistant cap interface

• Quick swap when the old sleeve is stained, etched, or cracked

Compatibility

• Fits Aqua Ultraviolet SL 100 UV sterilizers (single-lamp SL body)

• Not interchangeable with Classic-series sleeves or other SL wattages

Specifications

• Part: Quartz sleeve with bushing & rubber seal — SL 100

• Materials: UV-transparent fused quartz; engineered bushing; elastomer seal

• Use: Inside sterilizer housing (component itself is not submersible)

What’s Included

• (1) Quartz sleeve — SL 100

• (1) End bushing

• (1) Rubber seal / gasket

Replacement & Care Notes

1. Power OFF and let the unit cool; isolate plumbing and relieve pressure.

2. Remove end cap and lamp; carefully withdraw the old sleeve.

3. Clean seating surfaces; lightly lubricate the new seal with silicone-safe lube.

4. Install sleeve and bushing squarely; reassemble hand-tight—do not overtighten.

5. Restore flow and leak-test. Replace the UV lamp every 9–12 months and inspect the sleeve at each change.