Aqua Ultraviolet – 15 Watt Classic UV Sterilizer, 2" (Black) with Wiper

Aqua Ultraviolet – 15 Watt Classic UV Sterilizer, 2" (Black) with Wiper

Overview

Compact, durable UV-C sterilizer for ponds and aquariums. This Classic 15W model with 2" slip ports adds a built-in manual wiper to help keep the quartz sleeve clear between services—great for polishing loops, QT systems, and modest displays.

Key Features

• Classic housing with 2" slip inlet/outlet for easy plumbing in high-flow systems

• Single low-pressure 15W UV-C lamp for algae/bacteria/protozoa control

• Integrated manual wiper helps maintain sleeve clarity and UV performance

• Weather-resistant (non-submersible) body for indoor or protected outdoor installs

• Clear end cap shows lamp-on status; quick access for lamp/sleeve changes

Note: Aqua Ultraviolet does not recommend wipers for saltwater use; doing so can void the wiper warranty. For marine systems, many installers choose the non-wiper variant and clean the sleeve during lamp changes.

Sizing & Flow Guidance

• Sterilizer (freshwater): ~200–500 gal

• Sterilizer (saltwater): ~75 gal

• Clarifier (freshwater): up to ~2,000 gal

• Target UV-dose flows (EOL):

  • ~700 GPH ≈ 30,000 µW·s/cm² (clarifying)

  • ~466 GPH ≈ 45,000 µW·s/cm²

  • ~350 GPH ≈ 60,000 µW·s/cm²

  • ~280 GPH ≈ 75,000 µW·s/cm²

  • ~233 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)

Specifications

• Model: Classic 15 Watt, 2" Inlet/Outlet, Black, with Wiper

• MPN: A00034

• Lamp: (1) × 15W low-pressure UV-C

• Electrical: 120 V / 60 Hz; 0.48 A (approx.)

• Connections: 2" slip (in/out)

• Dimensions (unit): 16" × 3-3/4" × 6"

• Dimensions with Wiper: 17-7/8" × 3-3/4" × 6"

• Wiper clearance: 12"

• Cord Length: ~15 ft

• Mounting: Wall/stand (use suitable brackets/anchors)

• Warranty: Limited lifetime on housing; 1-year on other components (wiper excluded from saltwater coverage)

What’s Included

• Classic 15W UV body (Black, 2" ports) with manual wiper

• (1) 15W UV lamp

• Inline power supply

• Union/fitting set (2" slip)

• Quick start/installation guide

Installation Notes

1. Install after mechanical filtration on a pressure line; avoid gravity-feed.

2. Use unions/valves to set/service flow and to isolate the unit.

3. Operate the wiper with the lamp off; open/close valves as needed to relieve pressure first.

4. Protect from weather; do not submerge.

5. Replace lamp every ~9–12 months of continuous use to maintain dose.