Seachem Ammonia Alert
Seachem Ammonia Alert
43 en existencias
No se pudo cargar la disponibilidad de retiro
Ammonia Alert® – Continuous, Hassle-Free Ammonia Monitoring
Ensure the safety of your aquarium with Ammonia Alert®, the most efficient and long-lasting ammonia detection device on the market. Using Seachem's advanced sensor technology, this compact device provides real-time ammonia monitoring without the need for test kits, chemicals, or manual procedures.
Key Features
✅ Continuous Ammonia Detection – Monitors free ammonia 24/7
✅ No Test Kits or Chemicals Required – Just place it in the aquarium for instant readings
✅ Reversible Color Sensor – Changes from yellow (safe) to green to blue (toxic)
✅ Highly Sensitive – Detects ammonia levels below 0.05 mg/L (ppm)
✅ Long-Lasting Performance – Works for over a year, outlasting competitors by 9X
✅ Compact & Unobtrusive – Almost half the size of competing products
✅ For Freshwater & Marine Use – Ideal for all aquariums
How Ammonia Alert® Works
✔ Real-Time Monitoring: The sensor continuously detects free ammonia and changes color accordingly
✔ Fast Response: Detects increasing ammonia levels within 15 minutes
✔ Slower Reversal: After ammonia removal, it takes about 4 hours to revert from TOXIC to SAFE
✔ Accuracy & Sensitivity: Works best under natural daylight or daylight-simulating lights
Ammonia Alert® Color Interpretation
| Color | Status | Free Ammonia (mg/L) | Recommended Action |
|---|---|---|---|
| 🟡 Yellow | SAFE | < 0.02 | No action required |
| 🟢 Green | ALERT | 0.05 | Monitor closely; water change recommended in 3-5 days |
| 🔴 Red | ALARM | 0.2 | Water change needed within 1-3 days |
| 🔵 Blue | TOXIC | 0.5 | Immediate action required – perform a water change or use AmGuard™ |
💡 Did You Know?
- Free ammonia is far more toxic than ionized ammonia
- At pH 8.3 (marine), ALERT corresponds to 0.25 mg/L total ammonia
- At pH 7.0 (freshwater), ALERT corresponds to 3.6 mg/L total ammonia
Product Care & Maintenance
🚫 Avoid touching the sensor – Skin oils can reduce sensitivity
🚫 Do not clean with bleach, detergents, or abrasive materials
✅ To remove algae, gently wipe with a soft, clean material
✅ Check sensor response by holding it over an ammonia bottle – it should rapidly change color
✅ Drying out does not permanently damage the sensor – Sensitivity may even improve over time
Pair with AmGuard™ for Emergency Ammonia Removal!
🔹 If ammonia levels become dangerous, use AmGuard™ to instantly detoxify ammonia and provide up to 72 hours of protection
Protect your aquarium with Ammonia Alert® – the ultimate, long-lasting ammonia detection system! 🐠🌿
Compartir
