PolypLab Premium Coral Frag Glue Grenade Pack - 25 x 4g Tubes

PolypLab Premium Coral Frag Glue – Grenade Pack (25 × 4 g Tubes)

Overview
Single-use, pro-grade thick gel cyanoacrylate for ultra-clean fragging and aquascaping. The Grenade Pack’s 25 mini tubes (4 g each; 100 g total) prevent clogs, keep glue fresh, and make it easy to hand out at club meets or use at the bench without contaminating a big bottle.

Key Features

• Thick, gap-filling gel: Sticks to uneven rock and vertical faces

• Fast set: Initial grab in 5–15 seconds; handling strength within minutes

• Underwater friendly: Skin forms on contact with water for in-tank placement

• Reef-safe when cured: Suitable for SPS, LPS, soft corals, and inverts

• No-clog convenience: Single-use 4 g tubes reduce waste and drying out

What’s Included

• 25 × 4 g mini tubes (total 100 g) of PolypLab Premium Coral Frag Glue

Directions

1. Prep: Trim/clean frag base; lightly roughen rock or plug.

2. Apply: Add a pea-sized bead to the frag.

3. Underwater set: Dip bead to form a thin skin, press to rock 10–20 sec.
   or Dry set: Stop flow, pat area dry, press 10–20 sec, then restore flow.

4. Allow 24 hours for full cure before heavy handling.

Tips

• Cut the nozzle tip as small as needed for precision.

• For heavier colonies, build a wider “glue pad” and hold longer.

• Turn down strong flow during placement; ramp back up gradually.

• Store unopened tubes cool and dry; use gloves—CA bonds skin instantly.

Specifications

• Type: Thick gel cyanoacrylate adhesive

• Format: 25 single-use tubes, 4 g each (100 g total)

• Use: Coral fragging, plug-to-rock mounting, aquascaping