Aqua Ultraviolet – Replacement NEMA Transformer / Ballast for Classic 80 Watt

Aqua Ultraviolet – Replacement NEMA Transformer / Ballast for Classic 80 Watt

Overview

Factory replacement NEMA-enclosed transformer/ballast assembly for the Aqua Ultraviolet Classic 80W UV sterilizer (two 40-watt lamps). Restores reliable lamp ignition and correct operating current in a rugged, service-friendly outdoor-rated housing.

Key Features

• Genuine Aqua Ultraviolet NEMA enclosure power unit

• Matched output for Classic 80W systems (2 × 40W lamps)

• Weather-resistant, wall-mountable housing with cord strain relief

• Stable start/run current to maintain consistent UV output

• Drop-in swap for failed or aging power supplies

Compatibility

• Aqua Ultraviolet Classic 80 Watt UV sterilizers (all port sizes; wiper or non-wiper)

• Not for other wattages (8/15/25/57/114/120/160, etc.)

Specifications

• Input: 120V AC, 60Hz (North America)

• Output: Factory-matched to Aqua UV 40W low-pressure UV-C lamps (×2)

• Enclosure: NEMA weather-resistant case, external/dry-location install only (non-submersible)

• Mounting: Keyhole/through-holes for wall or equipment board

• Leads/Connectors: Pre-wired lamp and line cords (style may vary by production)

What’s Included

• (1) NEMA transformer/ballast assembly for Classic 80W

Installation & Safety Notes

1. Disconnect power and isolate plumbing before service.

2. Mount the NEMA box upright in a dry, ventilated area away from spray.

3. Wire/plug per the factory diagram; confirm line/neutral/ground.

4. Route lamp leads with strain relief; avoid sharp bends or pinch points.

5. After installation, verify each lamp strikes and operates steadily; replace aged lamps/sleeves as needed.

Want me to turn this into a single-row Shopify CSV with your standard columns and tags?