Aqua Ultraviolet – 40 Watt Classic UV Sterilizer, 3/4" (Black) with Wiper

Aqua Ultraviolet – 40 Watt Classic UV Sterilizer, 3/4" (Black) with Wiper

Overview

Mid-size, high-clarity UV-C sterilizer for ponds and aquariums. This Classic 40W model uses 3/4" ports and adds a manual wiper to keep the quartz sleeve clean between services—ideal for medium ponds, larger displays, and reef life-support polishing loops.

Key Features

• Classic housing with 3/4" inlet/outlet for easy inline plumbing

• Single low-pressure 40W UV-C lamp for algae/bacteria/protozoa control

• Integrated manual wiper helps maintain sleeve clarity and consistent UV output

• Weather-resistant (non-submersible) body for indoor or protected outdoor installs

• Clear end cap shows lamp-on status; quick access for lamp/sleeve changes

Note: Wipers are not recommended for saltwater use; using a wiper on saltwater can void the wiper warranty. Many marine installs choose the non-wiper variant and clean the sleeve during lamp changes.

Sizing & Flow Guidance

• Sterilizer (freshwater): ~1,200–2,000 gal

• Sterilizer (saltwater): ~325 gal

• Clarifier (freshwater): up to ~6,000 gal (with 50–75% plant coverage)

• Target UV-dose flows (EOL):

  • ~2,900 GPH ≈ 30,000 µW·s/cm² (clarifying)

  • ~1,930 GPH ≈ 45,000 µW·s/cm²

  • ~1,450 GPH ≈ 60,000 µW·s/cm²

  • ~1,160 GPH ≈ 75,000 µW·s/cm²

  • ~967 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)

Specifications

• Model: Classic 40 Watt, 3/4" Inlet/Outlet, Black, with Wiper

• Lamp: (1) × 40W low-pressure UV-C

• Electrical: 120 V / 60 Hz

• Connections: 3/4" (barb or slip style per kit)

• Wiper clearance: 12"

• Cord Length: ~15 ft

• Mounting: Wall/stand (use suitable brackets/anchors)

• Warranty: Limited lifetime on housing; 1-year on other components (wiper excluded from saltwater coverage)

What’s Included

• Classic 40W UV body (Black, 3/4" ports) with manual wiper

• (1) 40W UV lamp

• Inline power supply

• Union/fitting set (3/4")

• Quick start/installation guide

Installation Notes

1. Plumb after mechanical filtration on a pressure line; avoid gravity-feed.

2. Use unions/valves to set and service flow to your target dose.

3. Operate the wiper with the lamp off and pressure relieved.

4. Protect from weather; do not submerge.

5. Replace the lamp every ~9–12 months of continuous use to maintain dose.