Aqua Ultraviolet – 15 Watt Classic UV Sterilizer, 2" (Black) with Wiper

$334.45
$334.45
Aqua Ultraviolet
Quantity must be 1 or more

Aqua Ultraviolet – 15 Watt Classic UV Sterilizer, 2" (Black) with Wiper

Overview

Compact, durable UV-C sterilizer for ponds and aquariums. This Classic 15W model with 2" slip ports adds a built-in manual wiper to help keep the quartz sleeve clear between services—great for polishing loops, QT systems, and modest displays.

Key Features

  • Classic housing with 2" slip inlet/outlet for easy plumbing in high-flow systems

  • Single low-pressure 15W UV-C lamp for algae/bacteria/protozoa control

  • Integrated manual wiper helps maintain sleeve clarity and UV performance

  • Weather-resistant (non-submersible) body for indoor or protected outdoor installs

  • Clear end cap shows lamp-on status; quick access for lamp/sleeve changes

Note: Aqua Ultraviolet does not recommend wipers for saltwater use; doing so can void the wiper warranty. For marine systems, many installers choose the non-wiper variant and clean the sleeve during lamp changes.

Sizing & Flow Guidance

  • Sterilizer (freshwater): ~200–500 gal

  • Sterilizer (saltwater): ~75 gal

  • Clarifier (freshwater): up to ~2,000 gal

  • Target UV-dose flows (EOL):

    • ~700 GPH ≈ 30,000 µW·s/cm² (clarifying)

    • ~466 GPH ≈ 45,000 µW·s/cm²

    • ~350 GPH ≈ 60,000 µW·s/cm²

    • ~280 GPH ≈ 75,000 µW·s/cm²

    • ~233 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)

Specifications

  • Model: Classic 15 Watt, 2" Inlet/Outlet, Black, with Wiper

  • MPN: A00034

  • Lamp: (1) × 15W low-pressure UV-C

  • Electrical: 120 V / 60 Hz; 0.48 A (approx.)

  • Connections: 2" slip (in/out)

  • Dimensions (unit): 16" × 3-3/4" × 6"

  • Dimensions with Wiper: 17-7/8" × 3-3/4" × 6"

  • Wiper clearance: 12"

  • Cord Length: ~15 ft

  • Mounting: Wall/stand (use suitable brackets/anchors)

  • Warranty: Limited lifetime on housing; 1-year on other components (wiper excluded from saltwater coverage)

What’s Included

  • Classic 15W UV body (Black, 2" ports) with manual wiper

  • (1) 15W UV lamp

  • Inline power supply

  • Union/fitting set (2" slip)

  • Quick start/installation guide

Installation Notes

  1. Install after mechanical filtration on a pressure line; avoid gravity-feed.

  2. Use unions/valves to set/service flow and to isolate the unit.

  3. Operate the wiper with the lamp off; open/close valves as needed to relieve pressure first.

  4. Protect from weather; do not submerge.

  5. Replace lamp every ~9–12 months of continuous use to maintain dose.

Go to full site