Factory replacement NEMA-enclosed transformer/ballast assembly for the Aqua Ultraviolet Classic 80W UV sterilizer (two 40-watt lamps). Restores reliable lamp ignition and correct operating current in a rugged, service-friendly outdoor-rated housing.
Genuine Aqua Ultraviolet NEMA enclosure power unit
Matched output for Classic 80W systems (2 × 40W lamps)
Weather-resistant, wall-mountable housing with cord strain relief
Stable start/run current to maintain consistent UV output
Drop-in swap for failed or aging power supplies
Aqua Ultraviolet Classic 80 Watt UV sterilizers (all port sizes; wiper or non-wiper)
Not for other wattages (8/15/25/57/114/120/160, etc.)
Input: 120V AC, 60Hz (North America)
Output: Factory-matched to Aqua UV 40W low-pressure UV-C lamps (×2)
Enclosure: NEMA weather-resistant case, external/dry-location install only (non-submersible)
Mounting: Keyhole/through-holes for wall or equipment board
Leads/Connectors: Pre-wired lamp and line cords (style may vary by production)
(1) NEMA transformer/ballast assembly for Classic 80W
Disconnect power and isolate plumbing before service.
Mount the NEMA box upright in a dry, ventilated area away from spray.
Wire/plug per the factory diagram; confirm line/neutral/ground.
Route lamp leads with strain relief; avoid sharp bends or pinch points.
After installation, verify each lamp strikes and operates steadily; replace aged lamps/sleeves as needed.
Want me to turn this into a single-row Shopify CSV with your standard columns and tags?