High-capacity UV-C sterilizer for large ponds, aquaculture, and serious aquarium life-support. The Classic 160W with 2" slip ports and NEMA transformer (120V/60Hz) delivers robust water clarification and pathogen reduction with four 40-watt lamps in a service-friendly housing.
Heavy-duty Classic body with 2" slip inlet/outlet for high-flow plumbing
Quad-lamp (4 × 40W) design for strong UV dose and clear water
Clears green water; reduces algae, bacteria, and protozoa load
Weather-resistant (non-submersible) for indoor or protected outdoor installs
Remote NEMA transformer for reliable, easy-service power management
Sterilizer (freshwater): ~6,000–8,500 gal
Sterilizer (saltwater): ~1,200 gal
Clarifier (freshwater): up to ~16,000 gal (with 50–75% plant coverage)
Typical UV-dose flow targets (EOL):
~5,400 GPH ≈ 30,000 µW·s/cm² (max clarifying flow)
~3,600 GPH ≈ 45,000 µW·s/cm²
~2,700 GPH ≈ 60,000 µW·s/cm²
~2,160 GPH ≈ 75,000 µW·s/cm²
For tighter pathogen control, throttle toward the higher-dose flow targets. Use valves/unions to fine-tune and service.
Model: Classic 160 Watt, 2" Inlet/Outlet, White, w/ NEMA Transformer
MPN: A00160
UPC: 617750001609
Lamps: 4 × 40W low-pressure UV-C
Electrical: 120V/60Hz, approx. 1.7 A (total)
Connections: 2" slip (in/out)
Dimensions (2" unit): 36-7/8" × 8-5/8" × 17-1/2"
Cord Length: ~15 ft
Mounting: Wall/stand (use appropriate brackets/anchors)
Warranty: Limited lifetime on housing; 1-year on other components
Classic 160W UV body (White, 2" ports)
(4) 40W UV lamps
NEMA transformer (remote power supply)
Union/fitting set (2" slip)
Quick start/installation guide
Install after mechanical filtration on a pressure line; avoid gravity-feed.
Use unions/valves to isolate the unit and set flow to target dose.
Protect from weather; do not submerge.
Replace lamps annually (≈9–12 months run time) to maintain UV output.