Compact, durable UV-C sterilizer for ponds and aquariums. This Classic 15W model uses 3/4" ports and adds a manual wiper to help keep the quartz sleeve clear between services—great for polishing loops, QT systems, and modest displays.
Classic housing with 3/4" inlet/outlet for easy inline plumbing
Single low-pressure 15W UV-C lamp for algae/bacteria/protozoa control
Manual wiper helps maintain sleeve clarity and consistent UV output
Weather-resistant (non-submersible) for indoor or protected outdoor installs
Clear end cap shows lamp-on status; quick access for lamp/sleeve changes
Note: Wipers are not recommended for saltwater use; using a wiper on saltwater can void the wiper warranty. Many marine installs choose the non-wiper variant and clean the sleeve during lamp changes.
Sterilizer (freshwater): ~200–500 gal
Sterilizer (saltwater): ~75 gal
Clarifier (freshwater): up to ~2,000 gal
Target UV-dose flows (EOL):
~700 GPH ≈ 30,000 µW·s/cm²
~466 GPH ≈ 45,000 µW·s/cm²
~350 GPH ≈ 60,000 µW·s/cm²
~280 GPH ≈ 75,000 µW·s/cm²
~233 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)
Model: Classic 15 Watt, 3/4" Inlet/Outlet, Black, with Wiper
MPN: A00033
UPC: 617750000336
Lamp: (1) × 15W low-pressure UV-C
Electrical: 120 V / 60 Hz; 0.48 A (approx.)
Connections: 3/4" (barb or slip style per kit)
Dimensions (unit): 16" × 3-3/4" × 6"
Dimensions with Wiper: 17-7/8" × 3-3/4" × 6"
Wiper clearance: 12"
Cord Length: ~15 ft
Mounting: Wall/stand (use suitable brackets/anchors)
Warranty: Limited lifetime on housing; 1-year on other components (wiper excluded from saltwater coverage)
Classic 15W UV body (Black, 3/4" ports) with manual wiper
(1) 15W UV lamp
Inline power supply
Union/fitting set (3/4")
Quick start/installation guide
Plumb after mechanical filtration on a pressure line; avoid gravity-feed.
Add unions/valves for service and to set flow.
Operate the wiper with the lamp off; relieve pressure before wiping.
Protect from weather; do not submerge.
Replace the lamp every ~9–12 months of continuous use to maintain dose.