PolypLab Premium Coral Frag Glue 28 g – 7 Pack
Overview
Pro-grade, reef-safe thick gel cyanoacrylate for fast, reliable coral mounting. This value bundle includes seven 28 g tubes (total 196 g)—perfect for big fragging sessions, aquascaping, and shop/studio use.
Key Features
-
Thick, gap-filling gel: Stays where you put it; ideal for vertical or uneven surfaces
-
Fast set: Initial grab in 5–15 seconds; handling strength in minutes
-
Underwater friendly: Forms a skin so you can set frags directly in the tank
-
Reef-safe when cured: Won’t harm corals, inverts, or biofiltration
-
Precision control: Resealable cap helps reduce clogs and waste
What’s Included
-
7 × 28 g tubes PolypLab Premium Coral Frag Glue (total 196 g)
Directions
-
Prep the surfaces: Trim frag base and lightly roughen the plug/rock contact point.
-
Apply glue: Squeeze a pea-sized bead to the frag base (use more for uneven rock).
-
Underwater set (option A): Dip the glue bead in tank water to form a thin skin, press firmly to rock for 10–20 sec.
-
Dry set (option B): Stop flow, pat mounting spot dry, press for 10–20 sec, then restore flow.
-
Allow 24 hours for full cure before heavy handling.
Tips
-
Turn off strong flow while placing frags; restore gradually.
-
For heavy colonies, build a small “glue bridge” and hold longer.
-
Store upright, cool and dry. If tip skins over, trim a tiny amount to reopen.
-
Use nitrile gloves; cyanoacrylate bonds skin instantly.
Specifications
-
Type: Thick gel cyanoacrylate adhesive
-
Use: Coral fragging, plug-to-rock mounting, aquascaping
-
Set/Cure: Tack in seconds; full cure ~24 hrs
-
Size: 28 g per tube (×7) — 196 g total