AvidAqua MTO Tube Organizer
Overview
The AvidAqua MTO is a slim, reef-safe magnetic tube holder that keeps dosing, ATO, and airline lines neat, secure, and drip-free. It routes multiple tubes cleanly over your sump or display rim—no more slipping lines or messy cable ties.
Key Features
-
Magnetic mount for fast placement/repositioning (verify pane-thickness rating)
-
Multi-channel face—separate grooves for individual lines (dosing/ATO/air)
-
Positive-lock clips hold tubes firmly; quick to open/close for maintenance
-
Anti-drip ledge and clean drop edge to guide effluent straight down
-
Reef-safe materials—CNC acrylic with encapsulated, corrosion-resistant magnets
-
Low-profile footprint to minimize shadows and splash
Setup & Use
-
Clean the rim/pane (remove salt creep).
-
Place the wet side inside the sump/display; align the dry side outside.
-
Snap each tube into its channel; leave a small slack loop for service.
-
Position tips just above the waterline (or per your dosing protocol) to avoid back-siphon.
-
Route lines through the built-in strain relief to prevent tugging.
Tips
-
For dosing, keep tube tips separate to prevent cross-contamination.
-
Use check valves where appropriate and secure lines to your doser/ATO reservoir.
Compatibility
-
Fits common 1/8″–1/4″ (3–6 mm OD) dosing/airline tubing.
-
Works on glass or acrylic; confirm magnet rating vs. rim thickness.
Care & Maintenance
-
Rinse salt creep from channels during routine maintenance.
-
Inspect magnet encasement; discontinue use if coating is compromised.
-
Avoid trapping sand/grit between the mount and pane.
Product Specifications
-
Product: AvidAqua MTO Tube Organizer
-
Capacity: Multiple tube channels with snap-in clips
-
Mounting: Magnetic (inner/outer halves)
-
Materials: Reef-safe acrylic; encapsulated magnets
-
Use Case: Organizing dosing/ATO/airline tubing on sump or display
What’s in the Box
-
MTO magnetic tube organizer (inner & outer halves)
-
Integrated tube channels/clips
-
Quick-start guide