Aqua Ultraviolet – TWIST 25 Watt UV Sterilizer, 2" (White)

$463.23
$463.23
Aqua Ultraviolet
Quantity must be 1 or more

Aqua Ultraviolet – TWIST 25 Watt UV Sterilizer, 2" (White)

Overview

Compact, high-clarity UV-C sterilizer with a flexible plumbing layout. The TWIST 25W features 2" slip ports and a rotatable union block that lets you “twist” the inlet/outlet orientation to match your plumbing—cutting down on extra elbows and making installs cleaner and faster.

Key Features

  • Rotating (TWIST) union block to align inlet/outlet for tight spaces

  • Single 25W low-pressure UV-C lamp for algae/bacteria/protozoa control

  • 2" slip ports support high-flow pond and aquarium loops

  • Clear end cap shows lamp-on status; service-friendly access

  • Weather-resistant housing (non-submersible) for indoor or protected outdoor use

Sizing & Flow Guidance

  • Sterilizer (freshwater): ~500–1,200 gal

  • Sterilizer (saltwater): ~150 gal

  • Clarifier (freshwater): up to ~4,000 gal (with 50–75% plant coverage)

  • Target UV-dose flows (EOL):

    • ~1,200 GPH ≈ 30,000 µW·s/cm² (clarifying)

    • ~800 GPH ≈ 45,000 µW·s/cm²

    • ~600 GPH ≈ 60,000 µW·s/cm²

    • ~480 GPH ≈ 75,000 µW·s/cm²

    • ~400 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)

Specifications

  • Model: TWIST 25 Watt, 2" Inlet/Outlet, White

  • Lamp: (1) × 25W low-pressure UV-C

  • Electrical: 120 V / 60 Hz; ~0.48 A (typical)

  • Connections: 2" slip (in/out), rotatable union block

  • Dimensions (unit): ~20" × 3-3/4" × 6"

  • Cord Length: ~15 ft

  • Mounting: Wall/stand or supported inline (use appropriate brackets/anchors)

  • Warranty: Limited lifetime on housing; 1-year on other components

What’s Included

  • TWIST 25W UV body (White, 2" ports)

  • (1) 25W UV lamp

  • Transformer/power supply

  • Union/slip set

  • Quick start/installation guide

Installation Notes

  1. Install after mechanical filtration on a pressurized return line.

  2. Rotate (twist) the union block to the orientation that best aligns with your plumbing, then solvent-weld and allow full cure.

  3. Add unions/valves to isolate the unit and dial-in target flow.

  4. Protect from weather; do not submerge.

  5. Replace the lamp every 9–12 months for consistent UV dose; clean/inspect the quartz sleeve at each change.

Want me to convert this into a single-row Shopify CSV with your standard columns and tags?

Go to full site