Compact, high-clarity UV-C sterilizer with a flexible plumbing layout. The TWIST 25W features 2" slip ports and a rotatable union block that lets you “twist” the inlet/outlet orientation to match your plumbing—cutting down on extra elbows and making installs cleaner and faster.
Rotating (TWIST) union block to align inlet/outlet for tight spaces
Single 25W low-pressure UV-C lamp for algae/bacteria/protozoa control
2" slip ports support high-flow pond and aquarium loops
Clear end cap shows lamp-on status; service-friendly access
Weather-resistant housing (non-submersible) for indoor or protected outdoor use
Sterilizer (freshwater): ~500–1,200 gal
Sterilizer (saltwater): ~150 gal
Clarifier (freshwater): up to ~4,000 gal (with 50–75% plant coverage)
Target UV-dose flows (EOL):
~1,200 GPH ≈ 30,000 µW·s/cm² (clarifying)
~800 GPH ≈ 45,000 µW·s/cm²
~600 GPH ≈ 60,000 µW·s/cm²
~480 GPH ≈ 75,000 µW·s/cm²
~400 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)
Model: TWIST 25 Watt, 2" Inlet/Outlet, White
Lamp: (1) × 25W low-pressure UV-C
Electrical: 120 V / 60 Hz; ~0.48 A (typical)
Connections: 2" slip (in/out), rotatable union block
Dimensions (unit): ~20" × 3-3/4" × 6"
Cord Length: ~15 ft
Mounting: Wall/stand or supported inline (use appropriate brackets/anchors)
Warranty: Limited lifetime on housing; 1-year on other components
TWIST 25W UV body (White, 2" ports)
(1) 25W UV lamp
Transformer/power supply
Union/slip set
Quick start/installation guide
Install after mechanical filtration on a pressurized return line.
Rotate (twist) the union block to the orientation that best aligns with your plumbing, then solvent-weld and allow full cure.
Add unions/valves to isolate the unit and dial-in target flow.
Protect from weather; do not submerge.
Replace the lamp every 9–12 months for consistent UV dose; clean/inspect the quartz sleeve at each change.
Want me to convert this into a single-row Shopify CSV with your standard columns and tags?