Aqua Ultraviolet – SL 100 Watt UV Sterilizer

$2,270.92
$2,270.92
Aqua Ultraviolet
Quantity must be 1 or more

Aqua Ultraviolet – SL 100 Watt UV Sterilizer

Overview

High-output UV-C sterilizer built for large, high-flow systems. The SL 100 uses a single 100-watt low-pressure UV-C lamp in a streamlined, service-friendly housing—ideal for big ponds, aquaculture, and serious aquarium life-support where dependable water clarity and pathogen reduction are a must.

Key Features

  • High-capacity SL body designed for sustained, high-GPH operation

  • Single 100W low-pressure UV-C lamp for powerful germicidal dose

  • Clears green water; reduces free-floating algae, bacteria, and protozoa

  • Weather-resistant, non-submersible housing for indoor or protected outdoor installs

  • Clear end-cap window to confirm lamp-on status at a glance

  • Service-friendly layout for quick lamp and sleeve changes

Sizing & Dose Guidance

  • Suitable for large ponds, aquaculture raceways, and big display systems

  • Dial your pump/valves to meet target UV doses (common end-of-lamp-life targets):

    • ~30,000 µW·s/cm² for clarification

    • ~45,000–60,000 µW·s/cm² for general sterilization

    • ~75,000–90,000 µW·s/cm² for tighter pathogen control

Use a flow meter or calibrated pump curve to match dose; reduce flow for higher dose.

Specifications

  • Model: SL 100 Watt (single-lamp SL series)

  • Lamp: (1) × 100W low-pressure UV-C

  • Electrical: 120V / 60Hz power supply (transformer/ballast)

  • Connections: High-flow union ports (verify size with your plumbing)

  • Finish: Durable polymer housing; black/gray accents (varies by production)

  • Warranty: Limited lifetime on housing; 1-year on electrical and other components

What’s Included

  • SL 100 UV sterilizer body

  • (1) 100W UV-C lamp

  • Transformer/ballast power unit

  • Union set (size/style per kit)

  • Quick start/installation guide

Installation Notes

  1. Install after mechanical filtration on a pressurized return line (not gravity-feed).

  2. Add unions and valves to isolate the unit and set flow to your target dose.

  3. Mount in a dry, ventilated location; protect power components from spray—do not submerge.

  4. Replace the UV lamp every 9–12 months of continuous use; inspect/clean or replace the quartz sleeve as needed.

Want this turned into a single-row Shopify CSV with your standard columns and tags?

Go to full site