High-output UV-C sterilizer built for large, high-flow systems. The SL 100 uses a single 100-watt low-pressure UV-C lamp in a streamlined, service-friendly housing—ideal for big ponds, aquaculture, and serious aquarium life-support where dependable water clarity and pathogen reduction are a must.
High-capacity SL body designed for sustained, high-GPH operation
Single 100W low-pressure UV-C lamp for powerful germicidal dose
Clears green water; reduces free-floating algae, bacteria, and protozoa
Weather-resistant, non-submersible housing for indoor or protected outdoor installs
Clear end-cap window to confirm lamp-on status at a glance
Service-friendly layout for quick lamp and sleeve changes
Suitable for large ponds, aquaculture raceways, and big display systems
Dial your pump/valves to meet target UV doses (common end-of-lamp-life targets):
~30,000 µW·s/cm² for clarification
~45,000–60,000 µW·s/cm² for general sterilization
~75,000–90,000 µW·s/cm² for tighter pathogen control
Use a flow meter or calibrated pump curve to match dose; reduce flow for higher dose.
Model: SL 100 Watt (single-lamp SL series)
Lamp: (1) × 100W low-pressure UV-C
Electrical: 120V / 60Hz power supply (transformer/ballast)
Connections: High-flow union ports (verify size with your plumbing)
Finish: Durable polymer housing; black/gray accents (varies by production)
Warranty: Limited lifetime on housing; 1-year on electrical and other components
SL 100 UV sterilizer body
(1) 100W UV-C lamp
Transformer/ballast power unit
Union set (size/style per kit)
Quick start/installation guide
Install after mechanical filtration on a pressurized return line (not gravity-feed).
Add unions and valves to isolate the unit and set flow to your target dose.
Mount in a dry, ventilated location; protect power components from spray—do not submerge.
Replace the UV lamp every 9–12 months of continuous use; inspect/clean or replace the quartz sleeve as needed.
Want this turned into a single-row Shopify CSV with your standard columns and tags?