High-capacity inline UV-C sterilizer for ponds and serious aquarium life-support. The Classic 80W with 2" socket (slip-union) ports uses two 40-watt lamps to deliver strong water clarity and pathogen reduction in a compact, service-friendly housing.
Heavy-duty Classic body with 2" socket unions for high-flow PVC plumbing
Dual-lamp (2 × 40W) design for robust UV dose and fast water polishing
Targets free-floating algae, bacteria, and protozoa—no chemicals
Clear end cap to confirm lamp-on status at a glance
Weather-resistant (non-submersible) for indoor or protected outdoor installs
Optional Wiper version available (not recommended for saltwater use)
Sterilizer (freshwater): ~2,800–5,000 gal
Sterilizer (saltwater): ~800–1,000 gal
Clarifier (freshwater): up to ~10,000 gal (with 50–75% plant coverage)
Typical UV-dose flow targets (EOL):
~3,200 GPH ≈ 30,000 µW·s/cm² (clarifying)
~2,150 GPH ≈ 45,000 µW·s/cm²
~1,600 GPH ≈ 60,000 µW·s/cm²
~1,280 GPH ≈ 75,000 µW·s/cm²
~1,070 GPH ≈ 90,000 µW·s/cm² (tighter pathogen control)
Model: Classic Inline 80 Watt, 2" Socket, Black (No Wiper)
Lamps: (2) × 40W low-pressure UV-C
Electrical: 120V / 60Hz (dual inline power supplies)
Connections: 2" socket/slip unions (in/out)
Dimensions (unit): ~20" × 3-3/4" × 16-1/2"
Cord Length: ~15 ft
Mounting: Supported inline or wall/stand (use proper brackets/anchors)
Warranty: Limited lifetime on housing; 1-year on other components
Classic 80W inline UV body (Black, 2" socket ports)
(2) 40W UV lamps
Inline transformers/power supplies
2" slip unions
Quick start/installation guide
Install after mechanical filtration on a pressure line; follow the flow arrow.
Solvent-weld 2" PVC into the sockets; allow full cure before pressurizing.
Use valves/unions to tune flow to your target dose and simplify service.
Protect power components from weather; do not submerge the unit.
Replace both lamps every 9–12 months of continuous use to maintain dose.