A high-capacity UV sterilizer for serious pond and aquarium systems. The Classic 114W (2" ports) uses dual 57-watt lamps and a reflective internal chamber to deliver strong UV-C performance for water clarity and pathogen control—ideal for large freshwater ponds or sizeable saltwater/reef life-support loops.
Heavy-duty Classic housing with 2" slip ports for high-flow plumbing
Dual-lamp design (2 × 57W) with separate inline power supplies
Clears green water and reduces algae, bacteria, and protozoa load
Weather-resistant, non-submersible body for indoor or protected outdoor installs
Service-friendly layout; optional manual wiper available on the “Wiper” variant
Sterilizer (freshwater): up to ~2,200–4,400 gal
Sterilizer (saltwater): up to ~700 gal
Clarifier (freshwater): up to ~9,500 gal (with 50–75% plant coverage)
Typical max flow (sterilizer): ~3,900 GPH target for ~30,000 μW·s/cm² at end-of-lamp life
For tighter pathogen control (higher UV dose), reduce flow; for simple water clarification, higher flow is acceptable. Match pump and head-loss accordingly.
Model: Classic 114 Watt, 2" Inlet/Outlet, White (No Wiper)
MPN: A00114
Lamps: (2) × 57W low-pressure UV-C
Electrical: 120V/60Hz, two inline transformers; ~0.85A total draw
Connections: 2" slip (in/out)
Dimensions (unit): 20" × 3-3/4" × 16-1/2"
Cord Length: ~15 ft
Mounting: Wall/stand (use appropriate brackets/anchors)
Warranty: Limited lifetime on housing; 1 year on other components (lamps/transformers excluded from lifetime)
Classic 114W UV body (White, 2" ports)
(2) 57W UV lamps
(2) inline power supplies
Union/fitting set (2" slip)
Quick start/installation guide
Install after mechanical filtration on a pressure side; do not gravity-feed.
Use unions/valves for service and to fine-tune flow.
For marine systems, many pros skip the wiper variant; manual sleeve cleaning during lamp changes works well.
Replace lamps annually (≈9–12 months run time) for consistent UV dose.
Protect from direct weather; unit is weather-resistant, not submersible.