33043a-03

Trigger Systems Aquamarine Triton Reef Cube Sump TRITON20C-v2 Dimensions: 20″ long x 20″ wide x 15″ highRefugium Section: 19.5″ x 9.25″ (9 gallons)Skimmer Section: 10″ x 11″Return Pump Section: 6″ x 10″Total Water Volume: 24.3 gallonsRefugium Water Level: 8″ to 11.5″Skimmer Water Level: 7″ to 9.5″ adjustableDrain Input Fittings: 1″ (x3), 2 main, 1 configurableFilter Sock: 4″ (x2) The Triton series is designed to work with the Triton method which is becoming increasingly popular as it does not require water changes, which no one enjoys. One of the main requirements for the Triton method is to have a refugium sized at roughly 10% of the display tank volume. The TRITON20C refugium will hold 9 gallons when at the highest water level setting (11.5″) allowing it to support tanks up to around 90-100 gallons. The V2 design incorporates a filter sock holder on the main inputs for mechanical filtration to polish the water from time to time if needed. Also, this feature allows you to move back to the more traditional filtration method with filter socks in the future. Some of the features of the TRITON20C are: Refugium clear polycarbonate lid Algae blocker Independent water level control in refugium and skimmer sections Two 4″ Filter Socks included Additional 1″ input that can be placed in skimmer or return area Cable/Hose organizers Media platform with foam filter block Laser engraved water level indicator Four position countersunk probe holder Quick connect 1/4″ hose input fittings for dosing and ATO inputs, one in refugium section and four in return section Aquamarine blue coloring accents, solid white bottom and smoke back and around refugium section to block light and prevent unwanted algae growth in other sections TRITON20C SECTION DETAILS| The TRITON2OC has 3 main sections. Water enters the sump through the input fittings. A filter sock holder allows for placing 4″ filter socks under each input. Water then flows through the large refugium section that has a lid to prevent noise and water evaporation. Water then flows towards the front of the sump and then to right through the overflow teeth in the adjustable wall into Section 2. Section 2 is typically where the protein skimmer is located. Water purposely exits Section 2 by flowing under the aquamarine wall to allow proteins to remain at the surface maximizing the potential for the protein skimmer to extract from the system. The water then flows through the media platform and foam filter block into Section 3. The media platform can be used to allow for several different filtration methods (bag of carbon, bio balls, bio media, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Filter sock holder 2. Two 1″ input fittings 3. Quick connect hose inputs for dosing and ATO (x1 in refugium, x4 in return) 4. Cable/Hose organizer (x2) 5. Additional 1″ input, can be placed in skimmer or return area 6. Four position probe holder with countersunk holes 7. Laser engraved water level indicator 8. Adjustable water level in skimmer section 9. Media platform with foam filter block 10. Adjustable water level in refugium section 11. Algae blocker 12. Refugium clear polycarbonate lid 13. Cutout to allow mounting of refugium light 1″ Inputs The TRITON20C comes with two 1″ input fittings with extension pipes in the refugium section. A filter sock holder is installed so that 4″ filter socks (included) can be used for mechanical filtration if desired. These fittings allow for a 1″ PVC pipe to be glued into the fitting. If using sand or mud in the refugium, we recommend putting 1″ PVC elbows at the bottom of the extension pipes to avoid water flow from stirring up the sand or mud. An additional 1″ input is installed on a bracket that can be placed in the skimmer or return area. Possible install areas are shown by the arrows in the picture. This additional input is typically used for the siphon style overflow design for the emergency drain. The emergency drain is typically dry and will only have water flow through it when the other two main drains have issues. Therefore, we recommend to not have an extension pipe so the noise made when water flows through this input can be heard. Another common use for the additional input is in the return area for the return pump plumbing. Refugium Lid A lid is provided to cover the refugium section. This lid is made of clear polycarbonate so that it will not warp over time due to humidity and temperature. This lid helps to prevent excessive water evaporation and reduce noise. The inside of the top bracing has a lip for the lid to recess into giving it a nice look. There is also a notch cutout in the top bracing in the back to allow multiple lights to be mounted. Cable/Hose Organizer Hose and/or cable holders are provided to help keep the power cables, probe wires, hoses, etc. nice and organized. Two are provided, one located above the probe holder and the other located in the return section. Probe Holder Probe holder can hold up to 4 probes. One of the holes is larger to accommodate larger probes. The holes are countersunk to prevent probes from falling through. O-rings are provided to wrap around the probes to provide added support if required. Quick Connect Hose Input Fittings Quick connect inputs are located in the top brace to connect 1/4″ tubing from dosing or ATO. Four are located in the return section and one is located in the refugium section behind the drain input fittings. The quick connect input fittings all have extension pipes and the four in the return also included a support bracket mounted on the back wall where the extension pipe mount into. This puts the hose outputs at the appropriate height to view the drops entering the system, ensuring hoses are not clogged and minimizing water splashing/noise. Laser Engraved Water Level Indicator Subtle water level height indicator is laser engraved on the inside wall to help when setting the adjustable water level to to the desired water height based on protein skimmer requirements. Media Platform In the 2″ area between the skimmer section and return section, there is a media platform with a foam filter block on top. This can be used to hold the foam filter block that is provided or bags of other media. Algae Blocker Some types of algae will float at the top of the water surface. The algae blocker will stop floating algae from getting clogged up at the overflow teeth of the refugium wall. The blocker will force the water to flow under the blocker while leaving the algae floating at the surface. Adjustable Water Level Water level in the skimmer section is adjustable from 7″ to 9.5″ to accommodate for the water height requirements for different protein skimmers. Simply move the adjustable wall to the desired height location (use the laser engraved water level indicator to assist) and then tighten the two bolts to hold in place. Water level in the refugium section is also adjustable (from 8″ to 11.5″). The TRITON method requires higher flow rate through the sump than most other methods. Depending on your flow settings through the refugium and skimmer sections, water noise and splashing may be an issue. We made both levels configurable so you can fine tune based on individual needs. The Trigger Systems Aquamarine Triton Reef Cube Sump 20C-v2 is an exemplary choice for any reef aquarium enthusiast. The innovative and user-friendly design of this sump results in a vibrant and efficient water filtration system that ensures optimal aquarium health. Crafted specifically to handle the rigorous demands of a reef setup, this sump stands out with its versatile functionality and high-quality construction. One of the notable features of the Trigger Systems Aquamarine Triton Reef Cube Sump is its precision-engineered layout. The sump is designed to facilitate superior water flow, which is critical for maintaining the delicate balance in your reef aquarium. The various chambers within the sump are strategically placed to maximize the efficiency of mechanical, chemical, and biological filtration. This ensures that the water returning to your aquarium is crystal clear and free of impurities, providing a perfect environment for your corals and fish. Another significant advantage of the Trigger Systems Aquamarine Triton Reef Cube Sump is its adaptability to different filtration methods. Whether you prefer a refugium setup for natural nutrient export or a more mechanical approach with filter socks and media reactors, this sump can accommodate your needs. Its robust construction, featuring high-quality acrylic, promises durability and longevity. So, you won't have to worry about frequent replacements or repairs. Plus, it's aesthetically pleasing with its sleek, aquamarine finish that complements the overall look of your aquarium setup. The Trigger Systems Aquamarine Triton Reef Cube Sump 20C-v2 also takes into account ease of maintenance. The cleverly designed compartments allow for easy access, making cleaning and component replacement a breeze. This reduces downtime and ensures your filtration system is always operating at peak efficiency. With the integration of adjustable water levels and ample space for pumps and skimmers, the sump provides unparalleled control over your reef ecosystem's management. Additionally, the sump's sophisticated baffle system mitigates microbubbles, which are commonly problematic in reef aquariums. By minimizing the interference of microbubbles, the sump enhances the clarity of your water and improves the overall health of your aquatic inhabitants. This forward-thinking design highlights why the Trigger Systems Aquamarine Triton Reef Cube Sump is a preferred choice among hobbyists aiming for a pristine and thriving reef aquarium. In conclusion, the Trigger Systems Aquamarine Triton Reef Cube Sump 20C-v2 offers a comprehensive solution for modern reef aquarists. Its innovative design, ease of maintenance, and adaptability, make it a pivotal accessory for any reef aquarium setup. Investing in this sump signifies committing to the highest standards of aquarium care, ensuring your underwater world remains vibrant and healthy. Experience the peace of mind and satisfaction that comes with using a system engineered for excellence and optimized for your reef's unique requirements.

Introducing the Trigger Systems Aquamarine Triton Reef Sump TRITON26-v2 Dimensions: 26″ long x 13″ wide x 15″ highRefugium Section: 9.75″ x 12.5″ (~6 gallons)Skimmer Section: 8″ x 12.5″Return Pump Section: 5″ x 12.5″Total Water Volume: 20.4 gallonsRefugium Water Level: 8″ to 11.5″ adjustableSkimmer Water Level: 7″ to 9.5″ adjustableDrain Input Fittings: 1″ (x3) – 2 main, 1 configurableFilter Sock: 4″ (x2) The Triton series is designed to work with the Triton method which is becoming increasingly popular as it does not require water changes, which no one enjoys. One of the main requirements for the Triton method is to have a refugium sized at roughly 10% of the display tank volume. The TRITON26 refugium will hold over 6 gallons when at the highest water level setting (11.5″) allowing it to support tanks up to around 75 gallons. The V2 design incorporates a filter sock holder on the main inputs for mechanical filtration to polish the water from time to time if needed. Also, this feature allows you to move back to the more traditional filtration method with filter socks in the future. Some of the features of the TRITON26 are: Refugium clear polycarbonate lid Algae blocker Independent water level control in refugium and skimmer sections Two 4″ Filter Socks included Additional 1″ input that can be placed in skimmer or return area Cable/Hose organizers Media platform with foam filter block Laser engraved water level indicator Four position countersunk probe holder Quick connect 1/4″ hose input fittings for dosing and ATO inputs, one in refugium section and four in return section Aquamarine blue coloring accents, solid white bottom and smoke back and around refugium section to block light and prevent unwanted algae growth in other sections TRITON26 WATER FLOW PA| The TRITON26 has 3 main sections. Water enters the sump through the dual input fittings. A filter sock holder allows for placing 4″ filter socks under each input. Water then flows through the large refugium section that has a lid to prevent noise and water evaporation. Water then flows through the overflow teeth in the adjustable wall into Section 2. Section 2 is typically where the protein skimmer is located. Water purposely exits Section 2 by flowing under the aquamarine wall to allow proteins to remain at the surface maximizing the potential for the protein skimmer to extract from the system. The water then flows through the media platform and foam filter block into Section 3. The media platform can be used to allow for several different filtration methods (bag of carbon, bio balls, bio media, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Filter sock holder 2. Two 1″ input fittings 3. Quick connect hose inputs for dosing and ATO (x1 in refugium, x4 in return) 4. Refugium clear polycarbonate lid 5. Cutout to allow mounting of refugium light 6. Cable/Hose organizer (x2) 7. Four position probe holder with countersunk holes 8. Additional 1″ input, can be placed in skimmer or return area 9. Laser engraved water level indicator 10. Adjustable water level in skimmer section 11. Media platform with foam filter block 12. Adjustable water level in refugium section 13. Algae blocker 1″ Inputs The TRITON26 comes with two main 1″ input fittings with extension pipes in the refugium section. A filter sock holder is installed so that 4″ filter socks (included) can be used for mechanical filtration if desired.  These fittings allow for a 1″ PVC pipe to be glued into the fitting. If using sand or mud in the refugium, we recommend putting 1″ PVC elbows at the bottom of the extension pipes to avoid water flow from stirring up the sand or mud. An additional 1″ input is installed on a bracket that can be placed in the skimmer or return area. Possible install areas are shown by the arrows in the picture. Two locations are available in the skimmer area to allow spacing for fitting different protein skimmers. This additional input is typically used for the siphon style overflow design for the emergency drain. The emergency drain is typically dry and will only have water flow through it when the other two main drains have issues. Therefore, we recommend to not have an extension pipe so the noise made when water flows through this input can be heard. Another common use for the additional input is in the return area for the return pump plumbing. Refugium Lid A lid is provided to cover the refugium section. This lid is made of clear polycarbonate so that it will not warp over time due to humidity and temperature. This lid helps to prevent excessive water evaporation and reduce noise. The inside of the top bracing has a lip for the lid to recess into giving it a nice look. There is also a notch cutout in the top bracing in the back to allow multiple lights to be mounted. Cable/Hose Organizer Hose and/or cable holders are provided to help keep the power cables, probe wires, hoses, etc. nice and organized. Two are provided, one located above the probe holder and the other located in the return section. Probe Holder Probe holder can hold up to 4 probes. One of the holes is larger to accommodate larger probes. The holes are countersunk to prevent probes from falling through. O-rings are provided to wrap around the probes to provide added support if required. Quick Connect Hose Input Fittings Quick connect inputs are located in the top brace to connect 1/4″ tubing from dosing or ATO. Four are located in the return section and one is located in the refugium section behind the drain input fittings. The quick connect input fittings all have extension pipes and the four in the return also included a support bracket mounted on the back wall where the extension pipe mount into. This puts the hose outputs at the appropriate height to view the drops entering the system, ensuring hoses are not clogged and minimizing water splashing/noise. Laser Engraved Water Level Indicator Subtle water level height indicator is laser engraved on the inside wall to help when setting the adjustable water level to to the desired water height based on protein skimmer requirements. Media Platform In the 2″ area between the skimmer section and return section, there is a media platform with a foam filter block on top. This can be used to hold the foam filter block that is provided or bags of other media. Algae Blocker Some types of algae will float at the top of the water surface. The algae blocker will stop floating algae from getting clogged up at the overflow teeth of the refugium wall. The blocker will force the water to flow under the blocker while leaving the algae floating at the surface. Adjustable Water Level Water level in the skimmer section is adjustable from 7″ to 9.5″ to accommodate for the water height requirements for different protein skimmers. Simply move the adjustable wall to the desired height location (use the laser engraved water level indicator to assist) and then tighten the two bolts to hold in place. Water level in the refugium section is also adjustable (from 8″ to 11.5″). The TRITON method requires higher flow rate through the sump than most other methods. Depending on your flow settings through the refugium and skimmer sections, water noise and splashing may be an issue. We made both levels configurable so you can fine tune based on individual needs. The Trigger Systems Aquamarine Triton Reef Sump is an advanced filtration system, meticulously designed to cater to the complex needs of reef aquariums. Trigger Systems is a renowned name in the aquarium industry and known for its high-quality and innovative products. This specific model, the 26-v2, stands out due to its robust functionality and stylish aquamarine color, blending seamlessly with modern aquarium setups. The Aquamarine Triton Reef Sump is engineered not only to maintain but also to enhance the health of your aquatic environment by providing efficient filtration, ample water flow, and spacious compartments for various filtration media. The Aquamarine Triton Reef Sump features multiple chambers, including a designated space for a refugium. This allows for the cultivation of beneficial macroalgae and microorganisms which naturally filter the water and keep harmful nutrients in check. The refugium area is also ideal for breeding copepods and other live foods which are beneficial for the inhabitants of the reef tank. Furthermore, the sump includes filter sock holders that effectively capture debris and waste, preventing them from circulating back into the main tank. This ensures crystal-clear water, improving the overall aesthetics of your aquarium. Besides its functional benefits, the Trigger Systems Aquamarine Triton Reef Sump is constructed with high-quality acrylic material that ensures durability and longevity. The precision-cut panels and seamless welds provide maximum strength and an elegant appearance. Maintenance is made easy with its removable lids and accessible design, allowing effortless cleaning and replacement of filter socks or other media. Moreover, the water level in the sump is adjustable, giving users flexibility depending on their specific needs and equipment used. With all these features combined, the Aquamarine Triton Reef Sump by Trigger Systems is an indispensable component for any serious reef aquarium enthusiast.

Trigger Systems Aquamarine Triton Reef Sump 34-v2 TRITON34-v2 Dimensions: 34″ long x 15″ wide x 15″ highRefugium Section: 15.25″ x 14.5″ (~11 gallons)Skimmer Section: 10.5″ x 14.5″Return Pump Section: 5″ x 14.5″Total Water Volume: 31 gallonsRefugium Water Level: 8″ to 11.5″ adjustableSkimmer Water Level: 7″ to 9.5″ adjustableDrain Input Fittings: 1″ (x3) – 2 main, 1 configurableFilter Sock: 4″ (x2) The Triton series is designed to work with the Triton method which is becoming increasingly popular as it does not require water changes, which no one enjoys. One of the main requirements for the Triton method is to have a refugium sized at roughly 10% of the display tank volume. The TRITON34 refugium will hold over 10 gallons when at the highest water level setting (11.5″) allowing it to support tanks up to 100-150 gallons. The V2 design incorporates a larger refugium and a larger skimmer section. We also added a filter sock holder on the main inputs for mechanical filtration to polish the water from time to time if needed. This feature allows you to move back to the more traditional filtration method with filter socks in the future. A third configurable 1″ input fitting is provided that can be placed in the skimmer section or the return area. Lastly, the V2 design comes with an additional 1/4″ quick connect input in the front refugium section for dosing that requires more turbulent flow. Some of the features of the TRITON34 are: Refugium clear polycarbonate lid Algae blocker Independent water level control in refugium and skimmer sections Two 4″ Filter Socks included Additional 1″ input that can be placed in skimmer or return area Cable/Hose organizers Media platform with foam filter block Laser engraved water level indicator Four position countersunk probe holder Quick connect 1/4″ hose input fittings for dosing and ATO inputs, one in refugium section and four in return section Aquamarine blue coloring accents, solid white bottom and smoke back and around refugium section to block light and prevent unwanted algae growth in other sections TRITON34 WATER| The TRITON34 has 3 main sections. Water enters the sump through the dual input fittings. A filter sock holder allows for placing 4″ filter socks under each input. Water then flows through the large refugium section that has a lid to prevent noise and water evaporation. Water then flows through the overflow teeth in the adjustable wall into Section 2. Section 2 is typically where the protein skimmer is located. Water purposely exits Section 2 by flowing under the aquamarine wall to allow proteins to remain at the surface maximizing the potential for the protein skimmer to extract from the system. The water then flows through the media platform and foam filter block into Section 3. The media platform can be used to allow for several different filtration methods (bag of carbon, bio balls, bio media, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Filter sock holder 2. Two 1″ input fittings 3. Quick connect hose inputs for dosing and ATO (x1 in refugium, x4 in return) 4. Refugium clear polycarbonate lid 5. Cutout to allow mounting of refugium light 6. Cable/Hose organizer (x2) 7. Four position probe holder with countersunk holes 8. Additional 1″ input, can be placed in skimmer or return area 9. Laser engraved water level indicator 10. Adjustable water level in skimmer section 11. Media platform with foam filter block 12. Adjustable water level in refugium section 13. Algae blocker 1″ Inputs The TRITON34 comes with two main 1″ input fittings with extension pipes in the refugium section. A filter sock holder is installed so that 4″ filter socks (included) can be used for mechanical filtration if desired.  These fittings allow for a 1″ PVC pipe to be glued into the fitting. If using sand or mud in the refugium, we recommend putting 1″ PVC elbows at the bottom of the extension pipes to avoid water flow from stirring up the sand or mud. An additional 1″ input is installed on a bracket that can be placed in the skimmer or return area. Possible install areas are shown by the arrows in the picture. Two locations are available in the skimmer area to allow spacing for fitting different protein skimmers. This additional input is typically used for the siphon style overflow design for the emergency drain. The emergency drain is typically dry and will only have water flow through it when the other two main drains have issues. Therefore, we recommend to not have an extension pipe so the noise made when water flows through this input can be heard. Another common use for the additional input is in the return area for the return pump plumbing. Refugium Lid A lid is provided to cover the refugium section. This lid is made of clear polycarbonate so that it will not warp over time due to humidity and temperature. This lid helps to prevent excessive water evaporation and reduce noise. The inside of the top bracing has a lip for the lid to recess into giving it a nice look. There is also a notch cutout in the top bracing in the back to allow multiple lights to be mounted. Cable/Hose Organizer Hose and/or cable holders are provided to help keep the power cables, probe wires, hoses, etc. nice and organized. Two are provided, one located above the probe holder and the other located in the return section. Probe Holder Probe holder can hold up to 4 probes. One of the holes is larger to accommodate larger probes. The holes are countersunk to prevent probes from falling through. O-rings are provided to wrap around the probes to provide added support if required. Quick Connect Hose Input Fittings Quick connect inputs are located in the top brace to connect 1/4″ tubing from dosing or ATO. Four are located in the return section and one is located in the refugium section behind the drain input fittings. The quick connect input fittings all have extension pipes and the four in the return also included a support bracket mounted on the back wall where the extension pipe mount into. This puts the hose outputs at the appropriate height to view the drops entering the system, ensuring hoses are not clogged and minimizing water splashing/noise. Laser Engraved Water Level Indicator Subtle water level height indicator is laser engraved on the inside wall to help when setting the adjustable water level to to the desired water height based on protein skimmer requirements. Media Platform In the 2″ area between the skimmer section and return section, there is a media platform with a foam filter block on top. This can be used to hold the foam filter block that is provided or bags of other media. Algae Blocker Some types of algae will float at the top of the water surface. The algae blocker will stop floating algae from getting clogged up at the overflow teeth of the refugium wall. The blocker will force the water to flow under the blocker while leaving the algae floating at the surface. Adjustable Water Level Water level in the skimmer section is adjustable from 7″ to 9.5″ to accommodate for the water height requirements for different protein skimmers. Simply move the adjustable wall to the desired height location (use the laser engraved water level indicator to assist) and then tighten the two bolts to hold in place. Water level in the refugium section is also adjustable (from 8″ to 11.5″). The TRITON method requires higher flow rate through the sump than most other methods. Depending on your flow settings through the refugium and skimmer sections, water noise and splashing may be an issue. We made both levels configurable so you can fine tune based on individual needs. The Trigger Systems Aquamarine Triton Reef Sump 34-v2 is a state-of-the-art sump designed for dedicated aquarists who seek optimal efficiency and advanced filtration for their reef tanks. This high-performing sump system is specifically engineered to meet the stringent requirements of modern reef keeping, offering advanced features that set it apart from traditional sumps. Its aquamarine color not only adds visual appeal but also signifies its superior design and functionality. Here, we delve into why the Trigger Systems Aquamarine Triton Reef Sump 34-v2 should be your go-to choice for maintaining a healthy reef aquarium. First, let's talk about its dimensions and build quality. The 34-v2 model measures 34 x 15 x 15 inches, making it compact enough to fit under most standard reef tanks but spacious enough to accommodate various types of filtering media and equipment. Made from high-quality acrylic, this sump is designed for durability and long-lasting performance. The crystal-clear walls allow for easy monitoring of all internal processes, so you can ensure everything is running smoothly. The unique flow dynamics of the Trigger Systems Aquamarine Triton Reef Sump 34-v2 are specifically engineered to enhance water quality and maintain a stable environment. The Triton method, which this sump is optimized for, emphasizes efficient water movement and the use of macroalgae to balance nutrient levels naturally. By supporting this process, the sump ensures that your reef habitat can thrive without excessive intervention. Key features also include a comprehensive filtration system. The sump comes with filter socks to trap large debris before the water passes through finer filtration stages. This multi-layered approach enhances water clarity and ensures the longevity of downstream equipment. Additionally, the large refugium section can house a substantial amount of macroalgae or live rock, providing natural filtration and habitat for beneficial organisms. The built-in skimmer chamber is designed to accommodate a variety of protein skimmers, further ensuring that your tank remains free of harmful organic compounds. Ease of maintenance is another standout aspect of the Trigger Systems Aquamarine Triton Reef Sump 34-v2. It features a modular design, allowing for different sections to be accessed and cleaned independently. This means you won't have to disassemble the entire setup for routine maintenance, thus saving you time and effort. The integrated dosing ports also allow for straightforward addition of essential supplements, ensuring your tank remains balanced and your corals stay vibrant. The Trigger Systems Aquamarine Triton Reef Sump 34-v2 isn't just about functionality; it also adds an aesthetic appeal to your aquarium setup. The sleek, modern design complements any tank, and the transparent sections provide an impressive view of the sump's inner workings. Whether you're an experienced aquarist or just starting, this sump offers the reliability and ease of use you need to succeed. In conclusion, the Trigger Systems Aquamarine Triton Reef Sump 34-v2 is an exceptional piece of equipment that combines efficiency, durability, and ease of use. Its advanced features ensure optimal water quality and stable conditions for your reef tank, making it a worthwhile investment for any serious reef keeper. If you want a sump that delivers on performance and aesthetics, look no further than the Trigger Systems Aquamarine Triton Reef Sump 34-v2.

Trigger Systems Aquamarine Triton Reef Sump 44-v2 Dimensions: 44″ long x 16″ wide x 15″ high Refugium Section: 23″ x 15.5″ (~18 gallons)Skimmer Section: 11.5″ x 15.5″Return Pump Section: 6″ x 15.5″Total Water Volume: 43 gallonsRefugium Water Level: 8″ to 11.5″Skimmer Water Level: 7″ to 9.5″ adjustableDrain Input Fittings: 1″ (x4), 3 main, 1 configurableFilter Sock: 4″ (x3) The Triton series is designed to work with the Triton method which is becoming increasingly popular as it does not require water changes, which no one enjoys. One of the main requirements for the Triton method is to have a refugium sized at roughly 10% of the display tank volume. The TRITON44 refugium will hold 18 gallons when at the highest water level setting (11.5″) allowing it to support tanks up to 180-200 gallons. The V2 design incorporates a larger refugium and a larger skimmer section. We also added a filter sock holder on the main inputs for mechanical filtration to polish the water from time to time if needed. This feature allows you to move back to the more traditional filtration method with filter socks in the future. A fourth configurable 1″ input fitting is provided that can be placed in the skimmer section or the return area. Lastly, the V2 design comes with an additional 1/4″ quick connect input in the front refugium section for dosing that requires more turbulent flow. Some of the features of the TRITON44 are: Configurable input fitting plate (Patent Pending) Refugium clear polycarbonate lid Algae blocker Independent water level control in refugium and skimmer sections Three 4″ Filter Socks included Additional 1″ input that can be placed in skimmer or return area Cable/Hose organizers Media platform with foam filter block Laser engraved water level indicator Four position countersunk probe holder Quick connect 1/4″ hose input fittings for dosing and ATO inputs, one in refugium section and four in return section Aquamarine blue coloring accents, solid white bottom and smoke back and around refugium section to block light and prevent unwanted algae growth in other sections TRITON44 SE| The TRITON44 has 3 main sections. Water enters the sump through the three input fittings. A filter sock holder allows for placing 4″ filter socks under each input. Water then flows through the large refugium section that has a lid to prevent noise and water evaporation. Water then flows through the overflow teeth in the adjustable wall into Section 2. Section 2 is typically where the protein skimmer is located. Water purposely exits Section 2 by flowing under the aquamarine wall to allow proteins to remain at the surface maximizing the potential for the protein skimmer to extract from the system. The water then flows through the media platform and foam filter block into Section 3. The media platform can be used to allow for several different filtration methods (bag of carbon, bio balls, bio media, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Filter sock holder 2. Configurable drain input plate with three 1″ inputs 3. Quick connect hose inputs for dosing and ATO (x1 in refugium, x4 in return) 4. Refugium clear polycarbonate lid 5. Cutout to allow mounting of refugium light 6. Cable/Hose organizer (x2) 7. Four position probe holder with countersunk holes 8. Additional 1″ input, can be placed in skimmer or return area 9. Laser engraved water level indicator 10. Adjustable water level in skimmer section 11. Media platform with foam filter block 12. Adjustable water level in refugium section 13. Algae blocker Configurable Drain Input Plate The TRITON44 comes with three main 1″ input fittings with extension pipes in the refugium section. A filter sock holder is installed so that 4″ filter socks (included) can be used for mechanical filtration if desired.  These fittings allow for a 1″ PVC pipe to be glued into the fitting. If using sand or mud in the refugium, we recommend putting 1″ PVC elbows at the bottom of the extension pipes to avoid water flow from stirring up the sand or mud. An additional 1″ input is installed on a bracket that can be placed in the skimmer or return area. Possible install areas are shown by the arrows in the picture. Two locations are available in the skimmer area to allow spacing for fitting different protein skimmers. This additional input is typically used for the siphon style overflow design for the emergency drain. The emergency drain is typically dry and will only have water flow through it when the other two main drains have issues. Therefore, we recommend to not have an extension pipe so the noise made when water flows through this input can be heard. Another common use for the additional input is in the return area for the return pump plumbing. Refugium Lid A lid is provided to cover the refugium section. This lid is made of clear polycarbonate so that it will not warp over time due to humidity and temperature. This lid helps to prevent excessive water evaporation and reduce noise. The inside of the top bracing has a lip for the lid to recess into giving it a nice look. There is also a notch cutout in the top bracing in the back to allow multiple lights to be mounted. Cable/Hose Organizer Hose and/or cable holders are provided to help keep the power cables, probe wires, hoses, etc. nice and organized. Two are provided, one located above the probe holder and the other located in the return section. Probe Holder Probe holder can hold up to 4 probes. One of the holes is larger to accommodate larger probes. The holes are countersunk to prevent probes from falling through. O-rings are provided to wrap around the probes to provide added support if required. Quick Connect Hose Input Fittings Quick connect inputs are located in the top brace to connect 1/4″ tubing from dosing or ATO. Four are located in the return section and one is located in the refugium section behind the drain input fittings. The quick connect input fittings all have extension pipes and the four in the return also included a support bracket mounted on the back wall where the extension pipe mount into. This puts the hose outputs at the appropriate height to view the drops entering the system, ensuring hoses are not clogged and minimizing water splashing/noise. Laser Engraved Water Level Indicator Subtle water level height indicator is laser engraved on the inside wall to help when setting the adjustable water level to to the desired water height based on protein skimmer requirements. Media Platform In the 2″ area between the skimmer section and return section, there is a media platform with a foam filter block on top. This can be used to hold the foam filter block that is provided or bags of other media. Algae Blocker Some types of algae will float at the top of the water surface. The algae blocker will stop floating algae from getting clogged up at the overflow teeth of the refugium wall. The blocker will force the water to flow under the blocker while leaving the algae floating at the surface. Adjustable Water Level Water level in the skimmer section is adjustable from 7″ to 9.5″ to accommodate for the water height requirements for different protein skimmers. Simply move the adjustable wall to the desired height location (use the laser engraved water level indicator to assist) and then tighten the two bolts to hold in place. Water level in the refugium section is also adjustable (from 8″ to 11.5″). The TRITON method requires higher flow rate through the sump than most other methods. Depending on your flow settings through the refugium and skimmer sections, water noise and splashing may be an issue. We made both levels configurable so you can fine tune based on individual needs. The Trigger Systems Aquamarine Triton Reef Sump 44-v2 is a state-of-the-art aquarium sump designed to provide superior filtration for reef aquariums. It represents the pinnacle of aquatic filtration technology, so it ensures that your reef tank remains healthy and thriving. This sump is part of the renowned Triton series, which has been trusted by aquarists worldwide for its reliability and outstanding performance. This particular model, the 44-v2, features an innovative design that facilitates easy maintenance and robust filtration capabilities. It includes several compartments that allow for efficient separation of mechanical, chemical, and biological filtration processes. This design not only optimizes water quality, but it also extends the lifespan of your filtration media. One of the standout features of the Trigger Systems Aquamarine Triton Reef Sump 44-v2 is its large refugium section. This section provides ample space for macroalgae growth, which is essential for nutrient export and maintaining stable water parameters. The refugium also acts as a breeding ground for beneficial microorganisms, which further support the health of your reef aquarium. In addition to its functional design, the Aquamarine Triton Reef Sump is constructed with high-quality materials that ensure durability and long-term use. The acrylic build is resistant to warping and cracking, so you can rely on its structural integrity for years to come. It also features precision-cut components that fit together seamlessly, thereby eliminating the risk of leaks. Another important aspect of this sump is its noise-reducing features. The design includes innovative elements such as bubble traps and noise-dampening panels, so it minimizes the operational noise and ensures that your aquarium setup remains quiet and peaceful. This is particularly beneficial for home or office environments where a quiet ambiance is desirable. Moreover, the Trigger Systems Aquamarine Triton Reef Sump 44-v2 is designed with user convenience in mind. The layout allows for easy access to all compartments for cleaning and maintenance, and its transparent design lets you monitor the sump’s operation at a glance. Additionally, the inclusion of versatile hose and pump connections make it compatible with various aquarium setups, so you can integrate it seamlessly into your existing system. When it comes to dimensions, the 44-v2 model is spacious enough to handle large volumes of water, which makes it suitable for both small and large reef aquariums. Its compact footprint also ensures that it can fit comfortably within most aquarium stands without taking up excessive space. This versatility allows aquarists of all experience levels to benefit from its advanced filtration capabilities. In summary, the Trigger Systems Aquamarine Triton Reef Sump 44-v2 is an exceptional choice for any reef aquarium enthusiast. Its superior design, robust construction, and convenient features make it a top-performing sump that can enhance the health and beauty of your reef tank. By choosing this sump, you invest in a product that delivers consistent, high-quality filtration and ensures the long-term success of your aquatic ecosystem.

Trigger Systems Crystal ATO 10 Gallon

Trigger Systems Crystal ATO 5 Gallon

Trigger Systems Crystal ATO Container for Sumps 5 Gallon Dimensions: 6″ long x 14″ wide x 15″ tall 10 Gallon Dimensions: 10″ long x 16″ wide x 15″ tall Two 0.25″ OD hose ports Lid to prevent evaporation Opening for wires and hoses Made of 1/4″ thick material to prevent bowing Rounded and polished top The Trigger Systems Crystal ATO Container is an essential piece for any aquarist aiming for optimal performance and reliability in their sump system. This meticulously designed container enhances the automatic top-off process, ensuring that your aquarium maintains the right water level at all times. With the perfect blend of precision and durability, this container stands out in maintaining the welfare of your marine or freshwater setup. Manufactured with high-quality acrylic, the Trigger Systems Crystal ATO Container is not only robust but also transparent, so you can easily monitor the water levels without any guesswork. Its clear construction allows for a quick visual check of your ATO water reservoir, which means you can manage your aquarium more effectively and efficiently. The precision-cut pieces ensure a seamless fit that will endure the test of time, providing you with a reliable solution for years to come. What sets this ATO container apart is its optimized function in sumps. It is designed to complement and enhance your sump setup perfectly, facilitating a smooth and uninterrupted operation. Your tank’s inhabitants, whether they are delicate coral reefs or vibrant tropical fish, will benefit from the consistent water levels provided by this advanced piece of equipment. The Crystal ATO Container’s sleek, modern design also adds an aesthetic edge to your sump, ensuring your aquarium system looks as good as it performs. Furthermore, maintaining the Trigger Systems Crystal ATO Container is straightforward due to its simple yet effective design. This means less hassle for you and more consistent results for your aquarium. The flexibility of the container also allows for customization based on your specific need—whether you have a compact sump or a more extensive system, this ATO container can be adapted to suit various setups. Investing in a Trigger Systems Crystal ATO Container means investing in peace of mind because it ensures your aquarium’s stability and health. In conclusion, a well-maintained and stable aquarium relies heavily on reliable and efficient equipment. The Trigger Systems Crystal ATO Container is engineered to provide just that, making it an invaluable addition to any serious aquarist’s arsenal. So, if you’re looking to optimize your sump setup and ensure the well-being of your aquatic life, this ATO container is the ideal choice. Don’t settle for less when it comes to the care of your aquarium—choose the Trigger Systems Crystal ATO Container for unparalleled precision and durability.

Trigger Systems Crystal Sump 18" x 18" x 15" CRYS18C Dimensions: 18″ long x 18″ wide x 15″ highDrain/Skimmer Section: 10.875″ x 11″Front/Refugium Section: 17.5″ x 6.5″Return Pump Section: 6.4375″ x 11″Total Water Volume: 20 gallonsSkimmer Water Level: 9.5″ fixedDrain Input Fitting: 1″ (x1)Filter Sock: 4″ (x1) The CRYSTAL series sumps are reasonably priced and have the same design and quality as our RUBY series sumps but with all clear material. The CRYS18C can be used as a berlin style sump or a refugium style sump.  Some features of the CRYS18C sump are: Locking filter sock holder Solid top support brace to prevent bowing Foam filter block Protein skimmer section Refugium section CRYS18C SECTION DETAILS| The CRYS18C has 3 main sections. Section 1 of the CUBE design is where the water from the main tank enters through the filter sock. This is the section where the protein skimmer typically sits. Water flows from this section through a slit in the baffle into Section 2. Section 2 is typically used as the refugium section. Having the refugium facing the front is a nice feature allowing easy maintenance and visibility of the refugium. Water flows to the right and then towards the back over the baffle through the overflow teeth. The wall with the overflow teeth moves up and down to set the water level for Section 1 and Section 2. The water then goes through a foam block and under a baffle into Section 3. Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Drawstring tabs for 7″ drawstring filter socks 2. Locking filter sock holder 3. Foam filter block 4. Full top support brace to prevent bowing Drawstring Tabs A tab is located on the top support brace in front of the 1” bulkhead fitting. The purpose of this tabs is to provide a location for tying off 7” diameter filter socks that have drawstrings. The 7″ socks allow for longer times before the filter sock gets clogged and needs to be cleaned or replaced. Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the sock from falling out when it becomes clogged. The 4” filter sock is 100 micron rating. The Trigger Systems Crystal Sump 18" x 18" x 15" is an advanced sump that provides superb filtration and aesthetic appeal for your aquarium. It’s designed specifically for aquarists who demand high performance, reliability, and aesthetics in their filtration systems. With the Trigger Systems Crystal Sump, you will achieve cleaner water, better filtration, and an overall healthier environment for your fish and corals. Built with high-quality acrylic, the Crystal Sump is not only sturdy but crystal-clear for easy viewing and quick maintenance. This sump measures 18 inches by 18 inches and stands 15 inches tall, making it an ideal size for most modern aquariums. It includes multiple compartments for various filtration media, like mechanical sponges, bio-media, and chemical filtration, which can be customized to meet the unique needs of your tank. One of the standout features of the Trigger Systems Crystal Sump is its ultra-quiet operation. The strategically designed baffle system reduces noise and microbubbles significantly, so your aquarium can be the serene and tranquil centerpiece of your home. Moreover, it includes adjustable water levels and sufficient space for protein skimmers, reactors and, return pumps, offering unmatched flexibility to any aquarist. Maintaining the Trigger Systems Crystal Sump is remarkably simple because of its easily accessible compartments. The durable, professional-grade acrylic can withstand rigorous cleaning without scratching, ensuring long-term clarity and function. It is perfect for both saltwater and freshwater tanks, offering excellent compatibility for a diverse range of aquariums. Additionally, this sump comes with a pre-installed probe holder and convenient cord management to keep your equipment tidy, making it even more user-friendly. With the Trigger Systems Crystal Sump, you can count on a well-integrated and efficient filtration system that supports the health of your aquatic life. Craftsmanship and functionality come together in this meticulously designed sump, ensuring it meets the demands of even the most discerning aquarium enthusiasts.

Trigger Systems Crystal Sump 18C - 18x18

Trigger Systems Crystal Sump - Optimal Filtration for Your Aquarium Investing in a quality filtration system is crucial for maintaining a clean and healthy aquarium environment. The Trigger Systems Crystal Sump, sized at 20" x 12" x 15", offers an exceptional solution for aquatic filtration needs. Designed with precision and efficiency in mind, this crystal sump ensures optimal water quality, allowing your aquatic inhabitants to thrive. Trigger Systems specializes in aquarium sump manufacturing and are based here in the USA (Dallas, TX). All Trigger sumps come with a full top support brace which is made of a solid piece of material to prevent bowing over time from the humidity and water pressure. They also round the corners instead of squaring them which exponentially increases the strength of the corners. The CRYSTAL series sumps are reasonably priced and have the same design and quality as Trigger Systems' RUBY series sumps but with all clear material. The CRYS20S can be used as a berlin style sump or a refugium style sump. Some features of the CRYS20S sump are: Locking filter sock holder Dual platforms Solid top support brace to prevent bowing Foam filter block for top platform Protein skimmer section Refugium section Section Details & Water Flow Path The CRYS20S has 3 main sections. Water drains from the tank into section 1 through the 100 micron provided filter socks. Section 1 is typically where the protein skimmer sits. Water then flows through a slit in the first baffle into section 2. Section 2 is typically used as a refugium. If a refugium is not desired, then the protein skimmer or other equipment can be housed in section 2. The water then flows over the second baffle through 2 perforated platforms and under the third baffle into section 3. The top perforated platform holds the included foam block filter and the bottom platform is open to use for several different filtration methods (bag of carbon, bio balls, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Dual Media PlatformsThere are two platforms in the area before the return section. The top platform comes with a foam filter block and the bottom one is open to use for several different filtration methods (bag of carbon, bio balls, bio sponge, heater, rubble rock, etc.). Draw String TabsTabs are located on the top support brace in front of the 1” bulkhead fittings which are included. The purpose of these tabs is to provide a location for tying off 7” diameter filter socks that have draw strings.Locking Filter Sock HolderFilter socks snap and lock into the filter sock holders to secure the filter sock from falling out when it becomes clogged and needs to be cleaned or replaced. The 4” filter socks are 100 micron rating.Specifications Dimensions: 20″ long x 12″ wide x 15″ high Skimmer / Filter Sock Chamber: 10" x 11.5" Skimmer Water Level: 9.5″ fixed Drain Input Fitting: 1″ (x1) Filter Sock: 4″ (x1) Investing in a quality filtration system is crucial for maintaining a clean and healthy aquarium environment. The Trigger Systems Crystal Sump, sized at 20" x 12" x 15", offers an exceptional solution for aquatic filtration needs. Designed with precision and efficiency in mind, this crystal sump ensures optimal water quality, allowing your aquatic inhabitants to thrive. One of the standout features of the Trigger Systems Crystal Sump is its clarity and construction. Made from high-quality materials, the crystal-clear design allows for easy monitoring and maintenance. The dimensions of 20" x 12" x 15" provide ample space for water to flow and be filtered effectively. This size is ideal for various aquarium setups, offering flexibility and functionality. Moreover, the engineering behind the Trigger Systems Crystal Sump is geared towards maximized efficiency. The compartments are strategically designed to enhance water movement and filtration, reducing dead spots and making sure that every drop of water is filtered thoroughly. This well-thought-out layout not only fosters a healthier environment for your aquatic life but also reduces maintenance efforts on your part. Another advantage of the Trigger Systems Crystal Sump is its ease of installation and compatibility with different types of filtration media. Whether you are using mechanical, chemical, or biological filtration, this sump can accommodate your needs seamlessly. It allows for straightforward customization, so you can tailor the filtration process according to the specific requirements of your aquatic ecosystem. Beyond technical specifications, the practical benefits of using a Trigger Systems Crystal Sump are numerous. Enhanced water clarity, reduced pollutants, and a more stable environment are just a few of the benefits you will observe. These improvements contribute to the overall health and wellbeing of your aquarium inhabitants, resulting in livelier and more vibrant aquatic life. In conclusion, the Trigger Systems Crystal Sump 20" x 12" x 15" is an essential investment for any aquarium enthusiast looking to create an optimal aquatic environment. With its superior design, effective filtration capabilities, and ease of use, it stands out as one of the best sump options available. Prioritizing high-quality equipment like the Trigger Systems Crystal Sump ensures long-term success and satisfaction in maintaining your aquarium.

Enhance Your Aquarium with the Trigger Systems Crystal Sump CRYS30S Dimensions: 30″ long x 12″ wide x 15″ highDrain/Skimmer Section: 11″ x 11.5″Center/Refugium Section: 9.5″ x 11.5″Return Pump Section: 6″ x 11.5″Total Water Volume: 21.3 gallonsSkimmer Water Level: 9.5″ fixedDrain Input Fitting: 1″ (x1)Filter Sock: 4″ (x1) The CRYSTAL series sumps are reasonably priced and have the same design and quality as our RUBY series sumps but with all clear material. The CRYS30S can be used as a berlin style sump or a refugium style sump.  Some features of the CRYS30S sump are: Locking filter sock holder Dual platforms Solid top support brace to prevent bowing Foam filter block for top platform Protein skimmer section Refugium section CRYS30S SECTION DETA| The CRYS30S has 3 main sections. Water drains from the tank into section 1 through the 100 micron provided filter socks. Section 1 is typically where the protein skimmer sits. Water then flows through a slit in the first baffle into section 2. Section 2 is typically used as a refugium. If a refugium is not desired, then the protein skimmer or other equipment can be housed in section 2. The water then flows over the second baffle through 2 perforated platforms and under the third baffle into section 3. The top perforated platform holds the included foam block filter and the bottom platform is open to use for several different filtration methods (bag of carbon, bio balls, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Drawstring tabs for 7″ drawstring filter socks 2. Locking filter sock holder 3. Full top support brace to prevent bowing 4. Dual media platforms Dual Media Platforms There are two platforms in the area before the return section. The top platform comes with a foam filter block and the bottom one is open to use for several different filtration methods (bag of carbon, bio balls, bio sponge, heater, rubble rock, etc.). Drawstring Tabs A tab is located on the top support brace in front of the 1” bulkhead fitting. The purpose of this tabs is to provide a location for tying off 7” diameter filter socks that have drawstrings. The 7″ socks allow for longer times before the filter sock gets clogged and needs to be cleaned or replaced. Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the sock from falling out when it becomes clogged. The 4” filter sock is 100 micron rating. The Trigger Systems Crystal Sump 30" x 12" x 15" is designed to provide top-notch filtration for your aquarium. Incorporating high-quality materials and innovative features, this sump is a perfect solution for both hobbyists and professionals aiming to maintain a healthy and aesthetically pleasing aquatic environment. With its robust construction, the Trigger Systems Crystal Sump ensures durability and reliability. Made from clear, high-quality acrylic, it offers excellent visibility, so you can easily monitor your sump's performance. The Crystal Sump includes multiple chambers, allowing for the efficient separation of mechanical, chemical, and biological filtration processes. This helps in reducing toxins and ensuring water clarity, which is vital for the well-being of your aquatic inhabitants. The design of the Trigger Systems Crystal Sump is user-friendly and customizable. The adjustable water level feature lets you tailor the sumps' operation to fit your specific needs. Furthermore, the addition of a refugium section supports the growth of beneficial macroalgae and microorganisms. These elements play a crucial role in maintaining water quality and the overall health of your aquarium. Installation and maintenance of the Trigger Systems Crystal Sump are straightforward, which makes it an excellent choice for every aquarist. The precision-cut components and detailed instructions simplify the setup process. Routine maintenance is also hassle-free, allowing you to focus more on the enjoyment of your aquarium rather than upkeep tasks. In conclusion, the Trigger Systems Crystal Sump 30" x 12" x 15" is a highly efficient and versatile option for improving your aquarium’s filtration system. With its superior build quality, customizable features, and ease of use, this sump is an investment that will pay off in better water quality and a more vibrant aquatic environment. Whether you are setting up a new tank or upgrading an existing one, the Trigger Systems Crystal Sump is the perfect choice.

Trigger Systems Crystal Sump 30S - 30x12

Trigger Systems Crystal Sump 36" x 14" x 15" for Advanced Filtration CRYS36S Dimensions: 36″ long x 14″ wide x 15″ highDrain/Skimmer Section: 12″ x 13.5″Center/Refugium Section: 12.25″ x 13.5″Return Pump Section: 8″ x 13.5″Total Water Volume: 30.6 gallonsSkimmer Water Level: 9.5″ fixedDrain Input Fitting: 1″ (x2)Filter Sock: 4″ (x2) The CRYSTAL series sumps are reasonably priced and have the same design and quality as our RUBY series sumps but with all clear material. The CRYS36S can be used as a berlin style sump or a refugium style sump.  Some features of the CRYS36S sump are: Locking filter sock holder Dual platforms Solid top support brace to prevent bowing Foam filter block for top platform Protein skimmer section Refugium section CRYS36S SECTION DE| The CRYS36S has 3 main sections. Water drains from the tank into section 1 through the 100 micron provided filter socks. Section 1 is typically where the protein skimmer sits. Water then flows through a slit in the first baffle into section 2. Section 2 is typically used as a refugium. If a refugium is not desired, then the protein skimmer or other equipment can be housed in section 2. The water then flows over the second baffle through 2 perforated platforms and under the third baffle into section 3. The top perforated platform holds the included foam block filter and the bottom platform is open to use for several different filtration methods (bag of carbon, bio balls, rubble rock, etc.). Section 3 is the return section where the return pump will sit, pumping water back to the display tank. Key Features 1. Drawstring tabs for 7″ drawstring filter socks 2. Locking filter sock holder 3. Full top support brace to prevent bowing 4. Dual media platforms Dual Media Platforms There are two platforms in the area before the return section. The top platform comes with a foam filter block and the bottom one is open to use for several different filtration methods (bag of carbon, bio balls, bio sponge, heater, rubble rock, etc.). Drawstring Tabs Tabs are located on the top support brace in front of the 1” bulkhead fittings. The purpose of this tabs is to provide a location for tying off 7” diameter filter socks that have drawstrings. The 7″ socks allow for longer times before the filter sock gets clogged and needs to be cleaned or replaced. Locking Filter Sock Holder Filter socks snap and lock into the filter sock holders to secure the sock from falling out when it becomes clogged. The 4” filter socks are 100 micron rating. The Trigger Systems Crystal Sump is a state-of-the-art solution designed to enhance the efficiency and effectiveness of your marine tank's filtration system. Measuring at 36 inches in length, 14 inches in width, and 15 inches in height, this sump offers ample space to accommodate various types of equipment, making it an ideal choice for advanced aquarists. This robust and reliable system ensures that your aquatic environment remains pristine, allowing your marine life to thrive because of its high-quality materials and thoughtful design elements. One of the standout features of the Trigger Systems Crystal Sump is its clear acrylic construction, which not only provides a sleek and modern aesthetic but also allows for easy monitoring of water levels and equipment performance. The crystal-clear walls ensure that every component within the sump is visible, so you can perform maintenance tasks more efficiently. Furthermore, the durable build means the sump can withstand the rigors of continuous use, making it a long-term investment for your marine display. The Trigger Systems Crystal Sump also includes several compartments specifically designed to house various filtration media and devices. With dedicated sections for your protein skimmer, mechanical filtration, and refugium, this sump streamlines the entire filtration process, ensuring optimal water quality at all times. Additionally, the carefully engineered baffle system promotes consistent water flow and minimizes noise, providing a tranquil environment for both you and your marine inhabitants. Tailor-made for aquarists who demand superior performance and who want the best for their tanks, this sump model meets and exceeds expectations. Another remarkable advantage of the Trigger Systems Crystal Sump is its user-friendly setup and maintenance. The flexible design means you can easily customize and upgrade your filtration components as needed. Whether you're a novice or an experienced hobbyist, this sump simplifies complex tasks, making it easier to achieve and maintain the perfect aquatic environment. Its straightforward design eliminates unnecessary complications, allowing for a smooth installation process. In conclusion, the Trigger Systems Crystal Sump is more than just a container for your filtration equipment; it is a crucial component that enhances the overall health and aesthetic appeal of your marine tank. By investing in this high-quality, well-engineered sump, you are committing to creating a thriving habitat for your marine life. Don't settle for less when you can have the best with the Trigger Systems Crystal Sump, designed to deliver unmatched performance and durability for your aquatic ecosystem.

Trigger Systems Crystal Sump 36S - 36x14

Trigger Systems Platinum 20C Cube Sump - 20x20

Trigger Systems Platinum Sump - Exceptional Filtration Performance Key Features Magnetic Sensor Slider The sensors in the fleece area that tell the motor to turn and stop turning are on a slider that you can move up and down to put the sensor in the correct position. The position is not the same for all setups as the water level will be different. So this feature allows you to set the level without having to put your hands in the water. We also added an extra shut off sensor that is placed in the return pump area as this is the first area to change as soon as the return pump is shut off. Having redundant sensors gives you peace of mind you won’t come home and all the fleece is used up in case of a pump failure. Move-able or Removable Middle Wall (Patent Pending) Are you tired of trying to find a skimmer that fits your sump or trying to find a sump that has a skimmer section that accommodates your skimmer? On the PLATINUM series, in all the sumps except the cube, the middle wall can be moved around to make the skimmer section and refugium section custom sizes. This allows you to make the skimmer section the optimal size to fit your skimmer which in turn maximizes the refugium section. If you don’t care to have a wall and prefer one large area, the wall can be removed. It is required to use the sliding cross brace, even if the wall is removed. This keeps the sump from bowing out over time. Input Plate Gasket In some applications, over time, salt creep can build up around the edges of the input plate. We have added a gasket to seal the area between the sump and the input plate to prevent salt creep build up. Additional Features The PLATINUM series has all the bells and whistles. Below is a list of additional features. We will add more details soon. 1. Four 0.25″ tubing quick disconnects for dosing and ATO2. Cord holders to secure wires, cables and hoses3. Polycarbonate lid over fleece area4. Four position probe holder5. Wire channels to hide wires6. Adjustable water level with self adjusting top platform7. Dual acrylic platforms with diamond cut out pattern8. Laser engraved water level markings9. Additional 1″ input fitting that can be placed along top brace The Trigger Systems Platinum Sump is a revolution in the world of aquarium filtration. This 20" cube sump system, equipped with an automatic roller fleece filter, ensures your aquarium water remains crystal clear and pristine. With its advanced design and robust construction, the Trigger Systems Platinum Sump promises to deliver optimal performance for your aquatic setup. One of the standout features of the Trigger Systems Platinum Sump is its automatic roller fleece filter. This state-of-the-art component automatically advances when it detects a buildup of debris, effectively removing waste before it can break down and affect water quality. The result is a cleaner and healthier environment for your aquatic life, minimizing the need for manual maintenance and enhancing the overall efficiency of your filtration system. In addition to its cutting-edge filtration capabilities, the Trigger Systems Platinum Sump boasts a durable and space-efficient 20" cube design. This compact form factor allows it to fit seamlessly under most aquariums without sacrificing performance or capacity. The high-quality materials and meticulous craftsmanship ensure that this sump is built to last, providing reliable service for years to come. But the benefits of the Trigger Systems Platinum Sump extend beyond its primary functions. The sump also includes several features designed to facilitate easy installation and integration with your existing setup. Adjustable water levels, convenient probe holders, and ample room for additional equipment make this sump a versatile and user-friendly choice for hobbyists and professionals alike. Another advantage of the Trigger Systems Platinum Sump is its modular design, which allows users to customize their filtration setup according to specific needs and preferences. Whether you're aiming for a reef aquarium or a freshwater tank, the flexibility of this sump makes it easy to accommodate a variety of filtration methods and accessories. This adaptability also means you can upgrade or modify your system as your requirements evolve, giving you peace of mind and ensuring long-term satisfaction.

Trigger Systems Platinum Sump Replacement Filter Fleece The Trigger Systems Platinum Sump Replacement Filter Fleece is an essential accessory for maintaining the pristine condition of your aquarium. This high-quality filter fleece is specifically designed to fit Trigger Systems Platinum Sumps, ensuring optimal performance and effectiveness. If you have an aquarium, you know the importance of keeping the water clean and clear. With this replacement filter fleece, you can achieve just that, and provide a healthy environment for your aquatic life. One of the standout features of the Trigger Systems Platinum Sump Replacement Filter Fleece is its exceptional filtering capability. The fleece material is engineered to capture even the finest particles, preventing debris and detritus from circulating back into your aquarium. This not only maintains water clarity but also supports the overall health of your aquatic ecosystem. As a result, you will be able to enjoy a clear, beautiful aquarium with less effort, which is exactly what every aquarist seeks. Another key advantage of using the Trigger Systems Platinum Sump Replacement Filter Fleece is its ease of installation and maintenance. Designed for user convenience, this filter fleece can be effortlessly replaced, saving you time and effort. Regular maintenance becomes a breeze, as you can simply swap out the old fleece with a new one to ensure continuous filtration. This, in turn, supports a healthier and more stable environment for your fish and corals, helping to prevent issues related to water quality. In addition to its practical benefits, the Trigger Systems Platinum Sump Replacement Filter Fleece is also a cost-effective solution for aquarium enthusiasts. High-quality materials and construction mean that each piece of fleece lasts longer, providing excellent value for your investment. By choosing this replacement filter fleece, you are not only enhancing the cleanliness of your aquarium but also making a smart economic choice. When it comes to maintaining your aquarium, the importance of a reliable and efficient filtration system cannot be overstated. The Trigger Systems Platinum Sump Replacement Filter Fleece delivers on all fronts, providing exceptional filtering performance, easy maintenance, and long-lasting durability. Whether you are a seasoned aquarist or just starting out, this replacement filter fleece is an excellent choice to ensure your aquarium remains a thriving and beautiful habitat for your aquatic pets.

For a replacement foam filter for Trigger Systems sumps with the dimensions of 15.5" x 2.5" x 3/4", you should consider a few options: Custom Foam Filter: Many foam filter suppliers allow for custom sizes, so you might find a manufacturer who can create a filter specifically to your stated dimensions. Universal Foam Filters: Look for universal foam filter options that can be cut down to size. Ensure that the material is suitable for filtering water, with the appropriate density and porosity. Before you purchase, confirm the foam type (e.g., open-cell, closed-cell) and ensure it is compatible with your specific sump system for best performance.

Trigger Systems Ruby ATO 10 Gallon

Trigger Systems Ruby ATO 5 Gallon