33043a-03

Overview Maintain natural-seawater strontium with lab-grade precision. Isol8:Sr is an ultra-pure, stabilized strontium solution designed for ICP-guided trace management within the Captiv8 BluePrint methodology. Routine micro-dosing supports calcification and skeletal density in SPS/LPS corals, Tridacnid clams, and coralline algae—without affecting nutrients or water clarity. Key Features ICP-driven micro-dosing to correct verified Sr deficits with confidence. High-purity, reef-safe formulation for sensitive, low-nutrient systems. Supports calcification in stony corals, clams, and coralline algae. BluePrint-ready—slots into Captiv8 schedules alongside Isol8/Aragonite supplements. Two sizes—60 mL for small systems/trials and 355 mL for ongoing programs. Doser-friendly concentration for consistent automated micro-additions. Directions Test first: Obtain a recent ICP analysis and compare Sr to your target range. Calculate dose: Use the label’s dose-to-µg·L⁻¹ relationship for your total system volume. Split corrections: For larger adjustments, add multiple small doses over 24–72 hours. Add in high flow (sump/overflow); avoid direct contact with coral tissue. Verify & maintain: Re-test on your normal ICP cadence and convert to a small maintenance dose if ongoing uptake persists. Do not exceed label guidance—precision matters with trace elements. Best Practices Keep core parameters steady: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F (25–26°C). Log every addition; small, regular doses are more stable than occasional large ones. Space dosing several hours from strong oxidizers or metal-removal resins. Dose after water changes or fresh media swaps for consistent contact time. Compatibility Safe for SPS/LPS/soft coral systems when used strictly at trace levels per testing and label guidance. Works alongside skimmers, carbon, phosphate media, refugia, and major-ion dosing (dose at different times). Product Specifications Product: Captiv8 Reef BluePrint Isol8:Sr Format/Sizes: 60 mL and 355 mL ultra-pure strontium solutions Function: ICP-verified correction and maintenance of strontium at natural seawater trace levels System Types: Marine/reef (advanced, test-driven trace management) Storage/Safety: Keep sealed at room temperature; protect from light. Aquarium use only; keep out of reach of children and pets.

Overview Support a healthier, more biodiverse reef ecosystem. Isol8:Si delivers a stabilized, highly soluble silicate source designed for controlled elevation of dissolved silicon in saltwater—fueling sponge growth, encouraging beneficial diatom activity in refugia, and helping stabilize young or ultra-clean systems without relying on messy additives. Key Features Bioavailable silicate for marine systems—readily utilized by sponges and diatoms. Controlled dosing—formula designed for predictable, incremental adjustments. Refugia & biodiversity friendly—supports natural microfauna pathways that polish water. Reef-safe when used as directed—compatible with corals, fish, and inverts. Blueprint integration—pairs cleanly with the Captiv8 BluePrint methodology and other Isol8/Aragonite supplements. Directions Test first: Measure dissolved silicate with a reliable low-range checker. Start low: Dose per label for total system volume. Begin at ½ dose for the first week. Ramp carefully: Increase in small steps as needed to reach a low, non-zero silicate level appropriate for your goals (sponges/refugia). Dose location: Add to a high-flow area of the sump; avoid direct contact with corals. Monitor: Track NO₃/PO₄ and glass film/diatom behavior; adjust frequency accordingly. Do not overdose. Tip: For new or “too clean” systems, alternate light silicate dosing with your bacterial program to encourage balanced biofilms. Best Practices Maintain stable reef parameters: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F. Keep nutrients modest but measurable; extreme ULNS can stall biodiversity even with added silicate. Use mechanical filtration (socks/floss) and clean it frequently as communities establish. If you see persistent nuisance diatoms in the display, reduce dosage and shift additions to the refugium while you fine-tune export. Compatibility Works alongside protein skimming, carbon/GFO (avoid adding immediately before fresh media swaps), refugia, bacterial supplements, and amino/trace programs. Space silicate dosing several hours away from strong oxidizers/sterilizers (UV/ozone/peroxide). Product Specifications Product: Captiv8 Reef BluePrint Isol8:Si Format/Size: 60 mL liquid silicate supplement Use Case: Support sponge growth, controlled diatom activity, biodiversity seeding, and early-stage stabilization System Types: Marine/reef, FOWLR with refugia Storage: Keep sealed, room temperature, out of direct light. Safety: Aquarium use only. Keep out of reach of children and pets. 

Overview Restore natural seawater–level lithium with precision. Isol8:Li is an ultra-pure, stabilized lithium supplement designed for ICP-driven trace management within the Captiv8 BluePrint methodology. Used at true trace levels, it supports lithium-dependent biochemical pathways in corals and reef microbiota without affecting nutrients or clarity. Key Features ICP-guided micro-dosing for accurate correction of verified Li deficits. High-purity formulation suitable for sensitive, low-nutrient reefs. Stable and predictable response when added in controlled, small increments. BluePrint-ready—fits cleanly into Captiv8’s trace schedule and complements other Isol8/Aragonite supplements. Doser-friendly—ideal for automated micro-additions after calibration. Directions Test first: Obtain a recent ICP report and confirm lithium levels against your target. Calculate dose: Use the label’s dose-to-ppb/µg·L⁻¹ relationship for your total system volume. Split corrections: If a larger increase is required, divide into multiple micro-doses over several days. Add in high flow (sump/overflow). Avoid direct contact with coral tissue. Verify: Re-test with ICP on your normal cadence and convert to a small maintenance dose if needed. Do not exceed label recommendations; precision is essential with trace elements. Tip: Time additions after water changes or fresh media swaps so the system has consistent contact time. Best Practices Keep core parameters steady: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F. Log every trace addition; align with your BluePrint schedule. Avoid simultaneous use of strong oxidizers or heavy-metal removers immediately after dosing. If running new carbon/resins, dose after media changes for repeatable results. Compatibility Safe for reef systems when used strictly at trace levels per testing and label guidance. Works alongside skimming, carbon, phosphate media, bacterial programs, and refugia. Not intended as a medication and not for non-aquarium use. Product Specifications Product: Captiv8 Reef BluePrint Isol8:Li Format/Size: 60 mL ultra-pure lithium trace solution Use Case: ICP-verified correction and maintenance of lithium at natural seawater trace levels System Types: Marine/reef (advanced, test-driven trace management) Storage: Keep sealed at room temperature; protect from light. Safety: Aquarium use only. Keep out of reach of children and pets.

Overview Replenish true trace-level copper with precision. Isol8:Cu is an ultra-pure, stabilized copper solution designed for ICP-guided trace management within the Captiv8 BluePrint methodology. Used correctly at natural seawater levels, it supports copper-dependent enzymatic pathways in corals and reef microbiota—without elevating nutrients or clouding the system. Key Features ICP-driven micro-dosing to correct verified Cu deficits accurately. High-purity, reef-safe formulation for sensitive, low-nutrient systems. Predictable concentration for consistent manual or automated micro-additions. BluePrint-ready—integrates cleanly with Captiv8 scheduling alongside other Isol8/Aragonite supplements. Two sizes—60 mL for small systems/trials and 355 mL for ongoing programs. Directions Test first: Obtain a recent ICP analysis and confirm the recommended copper correction. Calculate dose: Use the label’s dose-to-ppb/µg·L⁻¹ relationship against total system volume. Split corrections: For larger increases, divide into multiple micro-doses over several days rather than one addition. Add in high flow (sump/overflow); avoid direct contact with coral tissue. Verify & maintain: Re-test on your normal ICP cadence and convert to a small maintenance dose if ongoing uptake is observed. Do not exceed label guidance—precision is critical with trace copper. Best Practices Keep core parameters stable: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F (25–26°C). Log every trace addition; align dosing with your BluePrint schedule. Avoid dosing immediately alongside strong oxidizers or heavy-metal removers. If running new carbon/resins, dose after media changes for repeatable results. Compatibility Safe for reef aquariums when used strictly at trace levels per testing and label guidance. Works alongside skimmers, carbon, phosphate media, bacterial programs, and refugia. Not intended as a therapeutic copper treatment for fish. Product Specifications Product: Captiv8 Reef BluePrint Isol8:Cu Format/Sizes: 60 mL and 355 mL ultra-pure copper trace solutions Function: ICP-verified correction and maintenance of copper at natural seawater trace levels System Types: Marine/reef (advanced, test-driven trace management) Storage/Safety: Keep sealed at room temperature; protect from light. Aquarium use only; keep out of reach of children and pets.

Overview Captiv8 Reef BluePrint Lugol’s Solution supplies a balanced, reef-safe blend of elemental iodine (I₂) and iodide (I⁻) to restore and maintain natural-seawater iodine levels. Iodine is an essential ultra-trace element that supports coral health, polyp extension, soft coral growth (e.g., Xenia, leathers), macroalgae vitality, and crustacean molting. Key Features Balanced I₂ + I⁻ formula for broad biological availability Ultra-pure, reef-safe—no phosphates, nitrates, or dyes Clear, fast-mixing solution; doses cleanly with no clouding ICP-friendly for precise, test-based supplementation Fine control via dropper—ideal for SPS/LPS and mixed reefs Directions & Dosing Always base iodine dosing on ICP testing or a trusted lab; adjust for your system’s actual uptake. Start low: Dose 1 drop (~0.05 mL) per 25 gal (95 L) daily for 7–10 days. Test & tune: Check iodine; adjust dose to maintain your target (often near natural seawater). Maintenance: Prefer small, consistent micro-doses over large, infrequent additions. Application: Add to a high-flow area or sump. Do not mix in the same dosing head with high-pH additives; separate by 5–10 minutes. If iodine tests above target or livestock show stress: stop dosing and perform a partial water change. Compatibility Safe with Ca/Alk/Mg programs, amino acids, and other Captiv8 Isol8™ traces when used as directed. Reef-safe for fish and invertebrates. Avoid overdosing—iodine is potent at ultra-trace levels. Ingredients Ultra-pure Lugol’s iodine/iodide solution in purified water. Storage & Handling Store at room temperature, away from light. Do not freeze. Keep tightly capped. Keep out of reach of children and pets. Product Specifications Product: Captiv8 Reef BluePrint – Lugol’s Solution Element(s): Iodine (I₂) & Iodide (I⁻) Format: Liquid trace supplement with dropper Size: 30 mL

Overview Hold boron (B) in the optimal range for stable pH dynamics, robust skeletal growth, and resilient reef chemistry. Isol8:B (355 mL) is an ultra-pure, stabilized boron solution engineered for the Captiv8 BluePrint methodology and test-driven reef keeping. Precise micro-dosing supports carbonate system buffering and overall ionic balance—without impacting clarity or nutrients. Key Features High-purity boron suitable for sensitive, low-nutrient reefs. Predictable concentration for accurate manual or automated dosing. Buffering support—helps maintain healthy carbonate system behavior alongside Alk/Ca/Mg. BluePrint-ready—fits directly into Captiv8 schedules and ICP/spot-test workflows. Doser-friendly—ideal for continuous micro-additions after pump calibration. Directions Test first: Verify boron against your target using ICP or a reliable method (typical reef targets align with natural seawater). Calculate dose: Use the label’s dose-to-ppm/µg·L⁻¹ relationship for your total system volume (display + sump minus displacement). Split corrections: If a larger increase is required, add in multiple small doses over 24–48 hours. Maintenance: Establish a daily or weekly dose that matches uptake; confirm with periodic testing and adjust. Add in high flow (sump/overflow). Do not mix in the same container with alkalinity, calcium, or concentrated traces. Bring alkalinity (7.5–9 dKH), calcium (420–450 ppm), and magnesium (1280–1380 ppm) into range, then fine-tune boron for long-term stability. Best Practices Keep salinity stable (1.025–1.026); unscheduled water changes can shift boron along with other ions. Time additions away from fresh carbon/resin swaps for consistent contact time. Record all trace additions; small, regular doses are more stable than infrequent large ones. Space dosing several hours from strong oxidizers or metal-removal resins. Compatibility Safe alongside skimmers, carbon, phosphate media, refugia, and bacterial/trace programs (dose at different times). Works with two-part, kalkwasser, and calcium reactors; keep additions separate and in high flow. Marine/reef use only. Product Specifications Product: Captiv8 Reef BluePrint Isol8:B Format/Size: 355 mL ultra-pure boron solution Function: Correction and maintenance of boron at reef-appropriate levels to support buffering and skeletal growth Use Case: Daily/weekly micro-dosing in SPS/LPS/mixed reefs within a test-driven program System Types: Marine/reef (advanced, ICP-guided trace management) Storage/Safety: Keep sealed at room temperature, out of direct light; aquarium use only; keep out of reach of children and pets.

Overview Keep minor and trace elements on point with a coordinated program. The Isol8: Minor & Trace Element Pack bundles Captiv8’s ultra-pure trace solutions into a single, BluePrint-compatible kit for ICP-guided correction and steady maintenance dosing. Designed for modern, low-nutrient reefs, it helps sustain coloration, polyp vitality, enzyme function, and overall microbiome balance—without impacting clarity or major-ion stability. Key Features Complete trace coverage — Curated set of minor & trace ions to address common seawater deficits. ICP-driven workflow — Calibrate corrections with lab results, then transition to predictable maintenance. High-purity formulations — Ultra-low contaminants for sensitive SPS/LPS and mixed reefs. BluePrint-ready — Fits directly into Captiv8 schedules alongside Isol8:Ca / Isol8:K / Isol8:Mg and Aragonite components. Doser-friendly — Consistent strengths for micro-additions via calibrated pumps. Directions Test first: Obtain current ICP results and identify any out-of-range elements. Plan corrections: Use each bottle’s dose-to-ppb/µg·L⁻¹ relationship for your total system volume. Split large adjustments: Add in multiple small doses over 24–72 hours rather than one addition. Maintenance: After reaching targets, begin low daily/weekly micro-doses per BluePrint guidance; re-check ICP on your normal cadence. Dosing technique: Add in high flow (sump/overflow). Do not mix concentrates together in the same container. Tip: Time trace additions after water changes or fresh media swaps for consistent contact time before export. Best Practices Keep core parameters steady: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F (25–26°C). Log every addition; small, regular doses yield more stable results than sporadic large ones. Avoid dosing directly alongside strong oxidizers or metal-removal resins; space by at least several hours. If running aggressive chemical media, dose traces after media changes. Compatibility Safe for SPS/LPS/soft coral systems when used strictly at trace levels per testing and label guidance. Works alongside skimmers, carbon, PO₄ media, refugia, and bacterial programs (dose at different times). Complements major-ion management via two-part, kalkwasser, or calcium reactors. Product Specifications Product: Captiv8 Reef BluePrint Isol8: Minor & Trace Element Pack Contents: Assorted ultra-pure minor/trace element solutions (formulas may vary by pack revision; see label) Function: ICP-guided correction and maintenance of minor & trace seawater chemistry System Types: Marine/reef (advanced, test-driven trace management) Storage/Safety: Keep sealed at room temperature; protect from light. Aquarium use only; keep out of reach of children and pets.

Overview Supercharge prepared foods for better color, appetite, and resilience. Invigor8 Reef is a BluePrint-compatible dry enrichment for marine fish and corals that blends free amino acids, essential fatty acids (HUFAs), vitamins, and trace co-factors. Use it to fortify frozen, pellet, flake, and slurry feeds—ideal for new arrivals, post-fragging recovery, and everyday conditioning in reef and FOWLR systems. Key Features Comprehensive enrichment — Aminos + vitamins + HUFAs to bolster tissue maintenance and energy. Color support — Includes pigment co-factors to help sustain vivid hues under strong reef lighting. Feed acceptance — Enhances palatability for finicky eaters and newly introduced fish. Clean use — Designed to bind to food; minimizes water clouding when used as directed. Two sizes — 25 g for trials/smaller systems and 75 g for ongoing use. Directions (Food Soak) Prepare food: Thaw frozen foods or portion dry foods as normal. Mix: In a small cup, combine the food with a splash of tank water. Add Invigor8 Reef: Sprinkle per label (a light dusting goes a long way) and stir to coat evenly. Soak 5–10 minutes, then feed. Aim for full consumption within 1–2 minutes. For coral slurries, add to your particulate mix and broadcast/target feed in high flow. Tip: Rotate Invigor8 Reef with Garlic100 or your preferred amino program on alternate days for variety without overloading nutrients. Best Practices Feed small, frequent portions for active planktivores (anthias, chromis); 1–2× daily for typical mixed reefs. Keep mechanical filtration clean and maintain consistent export to match your feeding level. Store the powder cool, dry, and out of light; reseal immediately after use. Compatibility Safe for reef and FOWLR systems when used as directed (applied to food, not dosed directly to water). Works with bacterial programs (Inocul8/Remedi8/Propag8) and carbon dosing; tune export accordingly. Suitable alongside coral nutrition (Coral8 Yin/Yang); stagger offerings by a few hours. Product Specifications Product: Captiv8 Reef BluePrint Invigor8 Reef Format/Sizes: 25 g and 75 g dry food enrichment Use Cases: Appetite and color boost, new-arrival conditioning, post-fragging support, daily vitality Systems: Marine/reef and FOWLR Storage/Safety: Keep sealed, cool, and dry. Aquarium use only; keep out of reach of children and pets.

Overview Give mixed reef communities a clean, complete staple. Integr8 Reef is a BluePrint-compatible dry microdiet formulated for everyday feeding of a wide range of reef fish—wrasses, gobies, clownfish, grammas, chromis, small angels and tangs. A balanced profile of marine proteins, marine lipids (omega fatty acids), microalgae, vitamins, and trace co-factors supports steady energy, vibrant coloration, and lean growth—without clouding when used as directed. Key Features Balanced omnivore formula — Marine proteins + microalgae for broad-spectrum nutrition. Fine, uniform particles — Suspend easily in flow for natural mid-water feeding. Highly digestible — Helps reduce waste and maintain water clarity. Enriched with vitamins & trace co-factors to support metabolism and coloration. Two sizes — 25 g for trials/smaller systems and 75 g for ongoing use. Directions Feed small portions 1–3× daily. Aim for complete consumption within 1–2 minutes. Broadcast method: Pre-wet a pinch in tank water and disperse into high flow so particles suspend. Target method: Create a light slurry and deliver near shy fish or specific zones. Adjust amount to fish count and appetite; avoid overfeeding. Storage: Reseal immediately; keep cool, dry, and out of light. Tip: Alternate Integr8 Reef with frozen offerings (mysis/roe) a few times per week for variety. Best Practices Maintain strong aeration and circulation to keep particulates suspended and encourage natural feeding behavior. Pair with reliable protein skimming and clean mechanical filtration to export residuals. For new or finicky fish, start with smaller, more frequent offerings and gradually increase portion size. Coordinate feed levels with your coral nutrition program (e.g., Coral8 Yin/Yang) and overall nutrient export. Compatibility Safe for reef and FOWLR systems when used as directed. Works alongside bacterial programs (Inocul8/Remedi8/Propag8) and carbon dosing; tune export to total feeding load. Suitable for auto-feeders that dispense fine granules/microdiets. Product Specifications Product: Captiv8 Reef BluePrint Integr8 Reef Format/Sizes: 25 g and 75 g dry microdiet (fine, uniform particles) Target Fish: Mixed reef omnivores—wrasses, gobies, clownfish, chromis, grammas, small angels/tangs, and similar species Use Case: Daily staple or supplemental feed; small, frequent feedings recommended Storage/Safety: Keep sealed, cool, and dry. Aquarium use only; keep out of reach of children and pets.

Overview Fuel active swimmers with clean, plankton-rich nutrition. Integr8 Planktivore is a BluePrint-compatible dry microdiet crafted for anthias, chromis, wrasses, small angels, juvenile tangs, and other planktivores. A balanced profile of marine proteins, lipids/omega fatty acids, free amino acids, and micronutrient co-factors supports daily energy needs, vibrant coloration, and consistent body condition—without clouding when used as directed. Key Features Planktonic particle sizes that suspend well and match natural feeding behavior. Marine proteins & essential fatty acids (EPA/DHA) for stamina, color, and tissue maintenance. Highly digestible formula to minimize waste and help maintain water clarity. Enriched microdiet with vitamins and trace co-factors for everyday resilience. Two sizes — 25 g for trials/smaller systems and 75 g for ongoing use. Directions Portion small, frequent feedings: 2–4 times daily for anthias and other high-metabolism planktivores. Broadcast method: Pre-wet a pinch in tank water, then disperse into high flow so particles suspend. Target method (selective feeders): Create a thin slurry and deliver near the school or perches. Adjust amount to achieve full consumption within 1–2 minutes; avoid overfeeding. Storage: Reseal immediately after use; keep cool, dry, and out of light. Tip: Combine with Coral8 Yin/Yang or your preferred coral regimen on alternate hours/days to balance system inputs. Best Practices Maintain strong aeration and flow to keep particles suspended. Pair with a reliable skimmer and clean mechanical filtration to export residuals. For new or shy fish, start with smaller, more frequent offerings and gradually increase portion size. Rotate foods (frozen/mysis/roe) a few times per week for variety. Compatibility Safe for reef and FOWLR systems when used as directed. Works alongside bacterial programs (Inocul8/Remedi8/Propag8) and carbon dosing; tune export to feeding level. Suitable for use with auto-feeders that handle fine granules/microdiets. Product Specifications Product: Captiv8 Reef BluePrint Integr8 Planktivore Format/Sizes: 25 g and 75 g dry microdiet (fine planktonic particles) Target Species: Anthias, chromis, fairy/flasher wrasses, small angels, juvenile tangs, and similar planktivores Use Case: Daily staple or supplemental feed; small, frequent feedings Storage/Safety: Keep sealed, cool, and dry. Aquarium use only; keep out of reach of children and pets.

Overview Jump-start biological filtration the clean way. Inocul8 is a dry, free-flowing starter consortium of non-pathogenic nitrifying and supporting heterotrophic bacteria selected to rapidly seed rock, sand, and media in new builds, rescapes, and post-maintenance resets. It establishes resilient biofilms, speeds cycling, and helps stabilize DIN (ammonia → nitrite → nitrate) while improving water clarity from day one. Key Features Rapid seeding of nitrifiers and supportive strains on rock, sand, and filter media. Clean start—formulated to minimize haze while encouraging robust biofilm attachment. Cycle support—aids conversion of NH₃/NH₄⁺ → NO₂⁻ → NO₃⁻ for a smoother break-in period. Versatile use—ideal for new systems, frag tanks, QT start-ups, and after heavy cleanings. Dry & stable—easy storage, precise measuring; two sizes for any project (25 g & 75 g). Directions (System Start & Resets) Prepare a slurry: In a clean cup, mix the measured Inocul8 with tank water until smooth. Use immediately. Dose: Add per label for total system volume, distributing to the sump and over rock/media in high flow. Aeration/flow: Ensure strong circulation and surface agitation. Nutrient source: Provide a controlled ammonia source (fishless or light stocking/feeding) so nitrifiers establish. UV/ozone: Leave off for 24–48 hours after dosing to maximize attachment, then resume as normal. Repeat: For new systems, re-dose lightly per label over the first 1–2 weeks to strengthen biofilms. Best Practices Keep mechanical filtration (socks/floss/rollers) clean so loosened organics are exported. Test NH₃/NH₄⁺, NO₂⁻, NO₃⁻ during the break-in; increase bioload gradually as readings stabilize. Avoid large chemical media changes during the initial 48 hours post-dose. Pair ongoing maintenance with Captiv8 bacterial programs (e.g., Remedi8/Propag8) once the system is cycling. Compatibility Safe for reef, FOWLR, frag, and QT systems when used as directed. Works alongside skimmers, carbon, and PO₄ media (resume/adjust after the 24–48 hr attachment window). Compatible with ceramic/rock media, sand beds, and biomedia bricks/blocks. Product Specifications Product: Captiv8 Reef BluePrint Inocul8 Formats/Sizes: 25 g and 75 g dry microbial blend Function: Rapid establishment of nitrifying/supportive biofilms; cycle acceleration and early clarity Use: Slurry dosing to high-flow areas on day 0 and during the first 1–2 weeks Storage/Safety: Keep sealed, cool, and dry; avoid moisture ingress. Aquarium use only; keep out of reach of children and pets.

Overview Boost feeding response and mask off-putting odors on prepared foods. Garlic100 is a concentrated garlic extract designed as a food soak for marine and freshwater aquariums. Use it to entice finicky eaters, support regular feeding after transport or fragging sessions, and improve acceptance of new pellets, frozen blends, or nori—without clouding the water when used as directed. Key Features High-strength garlic extract formulated for aquarium use. Food-soak application helps stimulate appetite and palatability. Versatile—works with frozen, pellet, flake, gel foods, and nori. Clean use—does not intentionally raise nutrients when dosed to food, not water. Two sizes—60 mL for testing/smaller systems and 355 mL for long-term use. Directions Prepare food: Thaw frozen foods or portion dry foods as normal. Apply Garlic100: Add per label (typically a few drops per portion) and mix to coat. Soak 5–10 minutes to allow absorption, then feed. Spot feeding: For shy or new fish, deliver small amounts near their shelter; repeat with fresh portions as needed. Do not overdose directly to the aquarium water; this product is intended as a food additive. Best Practices Use sparingly—strong aromas are effective at very low amounts. Rotate with unflavored feedings to keep fish responsive. Rinse feeding tools after use; store the bottle sealed and out of light. Compatibility Safe for marine and freshwater fish, reef tanks, and planted systems when used as directed (as a food soak). Works alongside vitamin/aminos and other food enhancers—apply separately, then mix. Product Specifications Product: Captiv8 Reef BluePrint Garlic100 Format/Sizes: 60 mL and 355 mL concentrated garlic extract Use Case: Food soak to enhance feeding response and palatability System Types: Marine/reef, freshwater, FOWLR, frag systems Storage/Safety: Keep sealed at room temperature, out of direct light. Aquarium use only; keep out of reach of children and pets.

Overview Bring dissolved inorganic nitrogen (DIN: NH₃/NH₄⁺, NO₂⁻, NO₃⁻) back into line with precision. Elimin8 DIN is a BluePrint-compatible liquid formulated for controlled reduction of nitrogen species in modern reef systems. Use it to make deliberate, stepwise adjustments that restore clarity and stability—without “bottoming out” nutrients or shocking livestock. Key Features Targeted DIN control — Tunable reductions of ammonia/ammonium, nitrite, and nitrate when dosed as directed. Clean export — Aids removal via mechanical filtration and skimming after treatment. Low-nutrient friendly — Designed for small, repeatable adjustments to avoid rapid swings. Methodology-ready — Integrates with Captiv8 BluePrint testing and dosing schedules. Two sizes — 60 mL for trials/smaller systems and 355 mL for ongoing programs. Directions Test first: Measure NH₃/NH₄⁺, NO₂⁻, and NO₃⁻ with reliable kits or a meter; set realistic targets (avoid absolute zero). Start low: Dose per label for total system volume, beginning at ½ of the recommended starting dose for the first applications. High-flow addition: Dose into a well-aerated, high-flow area upstream of fine mechanical filtration and your protein skimmer. Iterate: Re-test after each dose cycle. Make small, incremental corrections to “walk” DIN down to target. Maintain: Once in range, switch to smaller periodic doses to hold levels steady. Important: Rapid DIN drops can stress corals and fish. Adjust gradually and let testing guide your next dose. Best Practices Keep mechanical media (socks/floss/rollers) fresh during active reduction to capture particulates. Maintain strong aeration and circulation; nitrogen processing increases oxygen demand. Coordinate with your bacterial program (e.g., Remedi8/Propag8) for resilient biofilms after reductions. Avoid using immediately before large water changes or fresh chemical media swaps; dose after those events for consistent contact time. Record DIN trends to refine a stable maintenance routine. Compatibility Safe for reef, frag, and FOWLR systems when used as directed. Works alongside skimmers, carbon, and phosphate media (tune adsorbers conservatively to prevent over-stripping). Space additions several hours from other liquid supplements and avoid simultaneous use with strong oxidizers. Product Specifications Product: Captiv8 Reef BluePrint Elimin8 DIN Formats/Sizes: 60 mL and 355 mL liquid DIN reducer Function: Controlled reduction of ammonia/ammonium, nitrite, and nitrate with facilitated export Use Case: Stepwise correction and maintenance of DIN in SPS/LPS/mixed reefs and frag systems Storage/Safety: Keep sealed at room temperature, out of direct light. Aquarium use only; keep out of reach of children and pets.

Overview Complete your coral feeding program with precision particulates. Coral8 Yin is a BluePrint-compatible fine particulate nutrition blend designed for target or broadcast feeding of SPS, LPS, soft corals, zoanthids/palys, and gorgonians. Its balanced particle size distribution, marine proteins, lipids/omega fatty acids, and co-factors support strong feeding response, tissue fullness, and steady growth—without clouding when used as directed. Key Features Optimized particle sizes for broad coral uptake (from SPS polyps to LPS tentacles). Marine proteins & essential fatty acids to fuel tissue growth and resilience. Clean dispersion in high flow for even coverage and minimal residuals. Low-nutrient friendly—dose modestly and match to your export capacity. Two sizes—355 mL for smaller systems/testing and 1006 mL for long-term or high-demand use. Directions Shake very well. Start low: Dose per label for total system volume 3–4× per week, beginning at ½ dose for 1–2 weeks. Target feeding: Briefly reduce flow, apply near polyps, allow 3–5 minutes for capture, then restore flow. Broadcast feeding: Add to a high-flow area; keep skimmer online or set to a slightly drier skim during feeding windows. Monitor: Track NO₃/PO₄ weekly and adjust dose/frequency. Do not overfeed. Tip: Alternate Coral8 Yin (particulate) with Coral8 Yang (dissolved nutrition) on different days for comprehensive coverage. Best Practices Maintain stable reef parameters: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F (25–26°C). Feed when polyps are extended (often early photoperiod or after lights down). Keep mechanical filtration clean; replace socks/floss after heavier feed sessions. Compatibility Safe for mixed reefs, frag tanks, and NPS systems (increase frequency in small amounts for NPS). Plays well with bacterial programs, carbon, and PO₄ media (tune conservatively to avoid over-stripping). Space feedings from strong oxidizers/medications by 24 hours. Product Specifications Product: Captiv8 Reef BluePrint Coral8 Yin Format/Sizes: 355 mL and 1006 mL fine particulate coral nutrition Use Cases: Routine feeding response, tissue fullness, growth support; complements dissolved nutrition programs Methods: Target or broadcast dosing in high flow Storage/Safety: Keep sealed, out of direct light; follow label guidance regarding temperature after opening; aquarium use only; keep out of reach of children and pets.

Overview Drive confident feeding response and steady coloration. Coral8 Yang is a BluePrint-compatible dissolved nutrition supplement that delivers a balanced blend of amino acids, organic energy sources, and micronutrient co-factors to support polyp extension, tissue vitality, and everyday growth in SPS, LPS, soft corals, zoanthids/palys, gorgonians, and Tridacnid clams. Designed for modern, low-nutrient reefs to complement your particulate feeding—without adding haze. Key Features Fast-uptake dissolved nutrition for improved daily metabolism and recovery after fragging/shipping. Color & tissue support to help maintain rich hues and full, healthy polyp/tissue presentation. Low-nutrient friendly routine—tune small, repeatable doses to match your export capacity. Target or broadcast dosing; works alongside aminos, fatty acids, and fine particulate foods. Two sizes—355 mL for smaller systems/testing and 1006 mL for long-term or high-demand use. Directions Shake very well. Start low: Dose per label for total system volume 3–4× per week, beginning at ½ dose for 1–2 weeks. Feeding window: Target: Reduce flow briefly, add near colonies, wait 3–5 minutes, then feed particulates if desired. Broadcast: Add to a high-flow area; resume normal flow after 5–10 minutes. Export timing: Strong UV/ozone can reduce contact time—dose when lights are on and consider pausing sterilizers for ~1–2 hours. Monitor nutrients: Track NO₃/PO₄ weekly and adjust dose/frequency. Do not overdose. Tip: Alternate Coral8 Yang on feed days with your particulate coral food (staggered by a few hours) for broader coverage. Best Practices Keep reef parameters steady: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F (25–26°C). Maintain clean mechanical filtration so loosened organics are exported efficiently. Increase/decrease dosing slowly based on polyp extension, tissue fullness, and nutrient tests. Compatibility Safe for mixed reefs, clams, and NPS gorgonians (NPS often benefit from smaller, more frequent additions). Works alongside carbon, phosphate media, bacterial programs, and refugia; space dosing from oxidizers/medications by 24 hours. Skimmers may react temporarily—time your dose for best contact. Product Specifications Product: Captiv8 Reef BluePrint Coral8 Yang Format/Sizes: 355 mL and 1006 mL liquid dissolved nutrition supplement Use Cases: Routine color/growth support; post-fragging or post-shipment conditioning Methods: Target or broadcast dosing in high flow Storage/Safety: Keep sealed, out of direct light; follow label guidance regarding temperature after opening; aquarium use only; keep out of reach of children and pets.

Overview Drive predictable nitrate and phosphate reduction with carbon dosing done right. Carbon8 aq 8.35 is a high-purity, BluePrint-compatible liquid organic carbon formulated to fuel beneficial heterotrophic bacteria that convert NO₃/PO₄ into biomass for removal via skimming and filtration. Designed for controlled, stepwise adjustments in modern reef systems. Key Features Balanced carbon source — Supports rapid microbial uptake of nitrate and phosphate without harsh swings. Clarity & polish — Proper use often yields brighter water and cleaner rock/sand as organics are processed. Low-nutrient friendly — Tune small, repeatable daily doses to maintain modest, non-zero nutrients. Methodology-ready — Integrates with Captiv8 BluePrint schedules and bacterial programs (Remedi8/Propag8). Two sizes — 355 mL for smaller systems/testing and 1006 mL for long-term or high-demand use. Doser-friendly — Ideal for automated micro-dosing after careful calibration. Directions Test first: Measure NO₃ and PO₄. Set realistic targets (avoid absolute zero). Start low: Dose per label for total system volume at ½ the recommended starting dose for the first week. Ramp carefully: Increase in small steps every 3–4 days while watching NO₃/PO₄ trends and livestock. Export matters: Run a reliable protein skimmer and keep mechanical filtration clean to remove new biomass. Maintain: Once targets are reached, shift to a steady daily dose to hold levels. Re-test weekly and adjust. Important: Avoid rapid nutrient drops. Make changes gradually and base adjustments on test results and visual response. Best Practices Keep core parameters stable: Alk 7.5–9 dKH, Ca 420–450 ppm, Mg 1280–1380 ppm, Salinity 1.025–1.026, Temp 77–79°F. Ensure strong aeration/flow; carbon-driven bacterial growth increases oxygen demand. Dose at a consistent time each day; log NO₃/PO₄ to refine the routine. If nutrients bottom out, reduce or pause dosing and increase feeding slightly to restore balance. Compatibility Works alongside skimmers, carbon, phosphate media (tuned conservatively), UV/ozone (dose away from sterilizers), refugia, and bacterial supplements. Space additions from other liquid supplements by several minutes in a high-flow area. Not for freshwater use. Product Specifications Product: Captiv8 Reef BluePrint Carbon8 aq 8.35 Format/Sizes: 355 mL and 1006 mL liquid organic carbon Function: Supports microbial assimilation/export of nitrate and phosphate; water clarity and stability aid Use Case: Daily carbon dosing in SPS/LPS/mixed reefs and frag systems Storage/Safety: Keep sealed at room temperature, out of direct light. Aquarium use only; keep out of reach of children and pets.

Overview Prepare clean, livestock-ready saltwater with confidence. Anticip8 is a BluePrint-compatible conditioning concentrate formulated to treat new or stored seawater before use. It helps neutralize typical impurities, stabilize chemistry, and support early biofilm formation, so water changes and new-system starts go smoothly—without adding unwanted nutrients or haze. Key Features Fast water prep — Designed to condition new mix water for immediate reef use when dosed as directed. Chemistry stabilization — Helps buffer and balance freshly mixed seawater for consistent parameters. Biofilm support — Encourages healthy microbial footing in sumps, reservoirs, and new systems. Low-nutrient friendly — Does not intentionally raise NO₃/PO₄ when used correctly. BluePrint-ready — Integrates cleanly with Captiv8 dosing schedules and testing workflows. Multiple yields — Choose the concentrate size that makes 1 gallon, 5 gallons, or 16 ounces of working solution. Directions Mix saltwater first: Bring RO/DI to target salinity and temperature. Dose Anticip8: Add per label for your chosen working-solution yield (1 gal, 5 gal, or 16 oz). Stir for even distribution. Circulate & aerate: Run a pump for 30–60 minutes to ensure complete conditioning. Verify parameters: Check salinity, temperature, and pH/alkalinity as part of your normal routine. Use or store: Use immediately for water changes, or store covered with circulation. Re-dose per label if water is stored long-term. For new tanks or major resets, pair conditioned water with your bacterial program (e.g., Remedi8/Propag8 or your preferred culture). Best Practices Keep a consistent mixing reservoir routine (same RO/DI TDS, salinity, and mixing time). Rinse/rotate mechanical media after large water changes to remove loosened organics. Record batch dates and volumes to keep dosing predictable. Avoid adding other concentrates to the same container at the exact same time; stagger by several minutes in high flow. Compatibility Safe for reef, FOWLR, and frag systems when used as directed. Works with protein skimmers, carbon/PO₄ media, UV/ozone (dose in the reservoir; resume normal operation afterward). Plays well with Captiv8 BluePrint major-ion and trace programs. Product Specifications Product: Captiv8 Reef BluePrint Anticip8 Format/Yields: Concentrates that make 1 gallon, 5 gallons, or 16 ounces of working solution Use Cases: Conditioning freshly mixed seawater; prepping stored water; new-system starts and post-maintenance refills System Types: Marine/reef, FOWLR, frag systems Storage/Safety: Keep sealed at room temperature, out of direct light. Aquarium use only; keep out of reach of children and pets.

Overview Remedi8 is a dry, broad-spectrum microbial inoculant formulated to reduce dissolved organics (DOC), ammonia, nitrite, and nitrate, while improving water clarity in reef and fish-only marine aquariums. The curated consortium colonizes rock, sand, and filtration media, accelerating natural bio-oxidation and bio-assimilation pathways for a cleaner, more stable system. Key Features Nutrient control: Assists conversion/uptake of NH₃/NH₄⁺ → NO₂⁻ → NO₃⁻ and supports nitrate reduction via biomass assimilation Clarity boost: Lowers DOC that fuels film/algae; promotes crisp, polished water Balanced consortium: Nitrifiers + beneficial heterotrophs for robust, resilient biofilms Clean formula: No dyes, perfumes, or binders; reef-safe when used as directed Flexible use: Slurry dose to the system or spot-apply to media/rock Directions & Dosing Start conservatively; monitor nutrients (NH₃/NH₄⁺, NO₂⁻, NO₃⁻) and observe livestock. Prepare a Slurry Mix ¼ tsp (~0.5 g) per 10 gal (38 L) in a cup of tank water. Stir 1–2 minutes. New or Problem Systems (elevated nutrients/cloudy water) Dose the slurry at ¼ tsp (~0.5 g) per 10 gal (38 L) daily for 3–5 days, then test. Continue every other day for 1 week or until clarity and nutrients stabilize. Routine Maintenance / Established Reefs ¼ tsp (~0.5 g) per 20–25 gal (75–95 L) once weekly. After large water changes or heavy feeding events, add one extra maintenance dose. Best Practices Turn off UV/ozone and remove filter socks for 12–24 hours after each dose to maximize colonization. You may pause the skimmer 4–12 hours to reduce immediate export of the new bacteria. Dose into a high-flow area, sump, or directly over rock/media. Avoid simultaneous use of oxidizers/antibiotics. Resume UV/ozone the next day. Temporary mild haze after dosing is normal and typically clears within several hours. If any livestock shows stress, perform a partial water change, increase aeration, and reduce subsequent doses by 50%. Compatibility Safe for SPS/LPS/soft corals, clams, and reef-safe fishes when used as directed. Compatible with Ca/Alk/Mg regimens, amino acids, carbon sources, and phosphate management (avoid dosing at the same time as strong chemical flocculants or sterilizers). Ingredients Dry blend of marine-safe, non-pathogenic bacteria (nitrifying and beneficial heterotrophs) with inert carriers. Storage & Handling Store cool, dry, and tightly sealed. Do not refrigerate or freeze the dry powder. Use clean, dry utensils to prevent moisture ingress. Keep out of reach of children and pets. Product Specifications Product: Captiv8 Reef BluePrint – Remedi8 Function: Microbial nutrient control & water clarity Format: Dry powder Sizes: 25 g and 75 g jars/packages

Overview Propag8 is a curated dry consortium of beneficial marine microbes formulated for frag racks, grow-out tanks, and propagation systems. It seeds stable biofilms on plugs and tiles, supports post-frag tissue recovery, and promotes a balanced microbial community that resists nuisance film and opportunistic bacteria—without adding dyes or perfumes. Key Features Targeted for propagation systems: Encourages clean biofilms on plugs, tiles, and racks Post-frag support: Aids natural mucus production and tissue recovery after cutting Balanced community: Nitrifiers + heterotrophs for robust, resilient microbiomes Clean & reef-safe: No phosphates, nitrates, binders, or artificial colors Flexible use: Slurry dip, spot application, or broadcast dosing to the system Directions & Dosing Start conservatively; observe polyp extension and nutrient trends, then adjust. Prepare a Slurry Mix ¼ tsp (~0.5 g) per 10 gal (38 L) of system volume in a cup of tank water. Stir for 1–2 minutes. For Fresh Cuts / New Frags (Dip Method) Place frags in a clean container with tank water. Add the prepared slurry and gently baste frags/rubs for 5–10 minutes. Return frags to the system; pour the remaining dip through a fine mesh into a high-flow area (optional). Broadcast to Frag / Grow-Out Systems Dose the same ¼ tsp (~0.5 g) per 10 gal (38 L) once, then daily for 3 days. For ongoing maintenance, use ¼ tsp per 20–25 gal (75–95 L) 1–2× per week. Best Practices Turn off UV/ozone and remove filter socks for 12–24 hours after dosing to improve colonization. Skimmer: You may pause for 4–12 hours to reduce immediate export. Avoid dosing simultaneously with oxidizers/antibiotics. Maintain stable temperature, salinity, and moderate flow over racks. If water clouds slightly after dosing, that’s normal and typically clears within several hours. If any livestock appears stressed, perform a partial water change and reduce the dose by 50%. Compatibility Safe for SPS/LPS/soft corals, clams, and reef-safe fish when used as directed. Compatible with Ca/Alk/Mg programs, amino acids, and carbon sources; monitor nutrients and adjust export if needed. Ingredients A dry blend of marine-safe, non-pathogenic bacteria (nitrifiers and beneficial heterotrophs) with inert carriers. Storage & Handling Keep tightly sealed, cool, and dry. Do not refrigerate or freeze the dry powder. Use clean, dry utensils to avoid introducing moisture. Keep out of reach of children and pets. Product Specifications Product: Captiv8 Reef BluePrint – Propag8 Function: Dry microbial inoculant for fragging & grow-out systems Format: Dry powder Sizes: 25 g and 75 g jars/packages

Overview Phosph8 is a clean, highly soluble inorganic phosphate supplement designed to correct ultra-low PO₄ and stabilize nutrient balance in modern reef aquariums. Maintaining a small, consistent phosphate level supports zooxanthellae metabolism, coral coloration, polyp extension, and a healthier microbial community—especially in ULNS systems with heavy export (skimmer, refugium, GAC/GFO). Key Features Ultra-pure, reef-safe phosphate—mixes clear with no dyes or perfumes Fine control for micro-adjustments; ideal for SPS-dominant systems Helps prevent “zeroed nutrients” issues (pale tissue, stalled growth, nuisance dinos tied to starvation) Plays nicely with carbon dosing and trace programs when used as directed Two sizes for nano to large systems (60 mL dropper, 355 mL bottle) Directions & Dosing Always test PO₄ before and 30–60 minutes after dosing. Typical mixed-reef targets: ~0.02–0.08 ppm (tune for your system). Start low: Add 1 drop (~0.05 mL) per 25 gal (95 L), wait, and re-test. Creep to target: Repeat small additions until your target is reached. Stabilize: Maintain with daily micro-doses based on your tank’s consumption rather than large, infrequent additions. Application: Dose into a high-flow area or sump; avoid simultaneous dosing with high-pH additives—separate by 5–10 minutes. Pro tips If using GFO or other PO₄ binders, reduce/temporarily remove while raising PO₄; media can instantly strip additions. Do not use alongside lanthanum chloride flocculants. If PO₄ overshoots, pause dosing and rely on export/water changes until you’re back in range. Compatibility Safe for corals, clams, and reef-safe fishes when used as directed. Compatible with Ca/Alk/Mg regimens, bacterial supplements, and carbon dosing (monitor your NO₃:PO₄ balance). Ingredients Ultra-pure inorganic phosphate in purified water. Storage & Handling Store at room temperature, away from light. Do not freeze. Shake gently before use. Keep out of reach of children and pets. Product Specifications Product: Captiv8 Reef BluePrint – Phosph8 Function: Raises/maintains phosphate (PO₄³⁻) Format: Liquid Sizes: 60 mL dropper bottle; 355 mL bottle